rbig1 Posted January 26, 2015 #1 Posted January 26, 2015 OK. So we been in the cold for a while. Lets see how far you have tore your bike down. who has the biggest pile of parts.. Are we going to make spring season finish. don't have a better pic. lets see yours
Chaharly Posted January 26, 2015 #3 Posted January 26, 2015 [ATTACH=CONFIG]96684[/ATTACH] All the way! And you win
saddlebum Posted January 26, 2015 #4 Posted January 26, 2015 I think he wanted bike pictures not pictures of the local scrap yard.... :stirthepot: :stirthepot:
Flyinfool Posted January 26, 2015 #5 Posted January 26, 2015 I haven't even started yet...... All I did so far was get the bike up on the center stand.
WildBill1 Posted January 26, 2015 #6 Posted January 26, 2015 New SS lifters, high volume oil pump, SS pushrods, billet cam plate and 255 SE cams.
WildBill1 Posted January 26, 2015 #8 Posted January 26, 2015 Also changed light weight cam bearings to B168 heavy duty type.
Yammer Dan Posted January 26, 2015 #9 Posted January 26, 2015 That don't count Bill ya always gotta work on the Hardleys!!! We just work on our Yammys for something to do when we cain't ride....
rbig1 Posted January 27, 2015 Author #10 Posted January 27, 2015 bill you really keep it clean, I like that. Shuttle you going to get that back together. looks like you stripped two same time and place.
WildBill1 Posted January 27, 2015 #12 Posted January 27, 2015 That don't count Bill ya always gotta work on the Hardleys!!! We just work on our Yammys for something to do when we cain't ride.... Hey, I enjoy working on Yamaha's too.
WildBill1 Posted January 27, 2015 #13 Posted January 27, 2015 bill you really keep it clean, I like that. Shuttle you going to get that back together. looks like you stripped two same time and place. Same bike, you need to keep all them grimliens out while you there.
Yammer Dan Posted January 27, 2015 #14 Posted January 27, 2015 Hey, I enjoy working on Yamaha's too. Start out just tinkering and the next thing you know parts are scattered everywhere?? Yeah I know all about that one...
stickhandle2 Posted January 27, 2015 #15 Posted January 27, 2015 Haven't even started working on the 750 Virago our daughter rides, it is at my brothers place about 2 hours north of us and way colder there. Just have to change the starter clutch and replace a gasket to fix an oil leak from the same side of the motor as the starter clutch. Figure get the parts ordered in a week or two, then start hoping for warmer weather as March comes around. Mike
Ventureless Posted January 28, 2015 #16 Posted January 28, 2015 No working on bike. Still riding between snows. I did get the fairing put on my RSTD though!
Eck Posted January 28, 2015 #17 Posted January 28, 2015 Not a Yamaha, but a bike I am working on. A complete tear down. 100% of every bolt, nut washer has been removed.
Chaharly Posted January 28, 2015 #18 Posted January 28, 2015 Not a Yamaha, but a bike I am working on. A complete tear down. 100% of every bolt, nut washer has been removed. Awesome job keep up the good work
rbig1 Posted January 28, 2015 Author #19 Posted January 28, 2015 looks like we are all busy. cant ride wrench them.
eagleeye Posted January 28, 2015 #20 Posted January 28, 2015 Eck, A very cool project. Can't wait to see it all done.
shuttlebug Posted January 28, 2015 #21 Posted January 28, 2015 bill you really keep it clean, I like that. Shuttle you going to get that back together. looks like you stripped two same time and place. We'll see... it's not wanting to go together without a fight. It's really only one bike- replacing the frame. My 01 RSV got destroyed in a wreck, and I got it in my head to bring her back.
oldgoat Posted January 28, 2015 #22 Posted January 28, 2015 I have noting to work on? the PO took very good care of stella before I got her.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now