Hey check out this digital carb sync that I used to tune my 1st gen today!

[syscrusher]

You can find my most recent picture at the end of this thread here.

 

Or here:

 

Edited August 5, 2015 by syscrusher

[Flyinfool]

So then why is your sync so far off........

 

Looks good.

 

I can just tell that this is gonna get me yet........

[syscrusher]

When you've gotta have a gadget you've gotta have it.

 

It's got no liquid, more accurate, more compact, and kind of fun to build.

It's also somewhat extensible with an added sensor and programming.

It can accommodate up to six cylinders if you have a Valk, GW, K1600, or the odd CBX1050.

I haven't really looked but I'll bet six channel synchronizers are hard to find.

[cowpuc]

NICE!!

 

THAT looks like it defines accuracy Sys!! WAY COOL!!

[Chaharly]

When you've gotta have a gadget you've gotta have it.

 

It's got no liquid, more accurate, more compact, and kind of fun to build.

It's also somewhat extensible with an added sensor and programming.

It can accommodate up to six cylinders if you have a Valk, GW, K1600, or the odd CBX1050.

I haven't really looked but I'll bet six channel synchronizers are hard to find.

 

So when can I put my order in?

[syscrusher]

So when can I put my order in?

 

I'm not the guy to ask, I'm just proud of the one I have.

The guy who started that thread that I linked may be able to sell you a board and tell you where to get the rest of the parts you need.

Until someone finds an automotive sensor with a full spec sheet the ones this project uses are about $15 each.

The next most expensive piece is the display, it costs $10. An Arduino Uno clone is $8.50.

The other small parts cost under $5.

 

You might be able to get your order in right after you read this.

[Chaharly]

I'm not the guy to ask, I'm just proud of the one I have.

The guy who started that thread that I linked may be able to sell you a board and tell you where to get the rest of the parts you need.

Until someone finds an automotive sensor with a full spec sheet the ones this project uses are about $15 each.

The next most expensive piece is the display, it costs $10. An Arduino Uno clone is $8.50.

The other small parts cost under $5.

 

You might be able to get your order in right after you read this.

 

Well I do suppose that the carbtune I just got a few weeks ago probably has some life in it LOL