Flyinfool Posted March 8, 2015 #51 Posted March 8, 2015 I just finished getting all my parts. I am building it for 6 just in case I need 6 some day.
videoarizona Posted March 11, 2015 #52 Posted March 11, 2015 I just finished getting all my parts. I am building it for 6 just in case I need 6 some day. Jeff, let me know how it goes. I have the board but haven't ordered parts yet....still not sure about this whole thing. still don't have my head around how the thing goes together.....old age in the way I guess!
tz89 Posted March 11, 2015 Author #53 Posted March 11, 2015 I'm glad to help. Feel free to PM, too. I use the feedback to improve the instructions. Basically: 1. Mount the sensors. 2. Mount the 2 switches and resistor. 3. Put header pins into the arduino, sync board on top of that and solder. The sync board plugs/unplugs. 4. Solder pins to the LCD and then solder that to the sync board. 5. Solder either header pins or a jump wire to the power selector.
tz89 Posted March 16, 2015 Author #54 Posted March 16, 2015 Who would have guessed? The happy Valkyrie guy I posted above bought a dozen boards because he has a new idea for a cool box. I would do the same here if someone has those skills. PM me.
tz89 Posted March 22, 2015 Author #55 Posted March 22, 2015 (edited) Here's what his box looks like. He seems busy...... For Sale: Digi Sync Carburetor Synchronizer(s) Edited March 31, 2015 by tz89
tz89 Posted March 31, 2015 Author #56 Posted March 31, 2015 (edited) Here's a photo of my new black label boards. A little more expensive for me, but lead-free (can export anywhere) and with some minor text improvements. Most important, fast and reliable supply. Edited April 14, 2015 by tz89
tz89 Posted April 12, 2015 Author #57 Posted April 12, 2015 The Valkyrie guy attached an oscilloscope and has a go at vacuum science http://www.valkyrieforum.com/bbs/index.php/topic,77183.msg755990.html#msg755990
tz89 Posted April 12, 2015 Author #59 Posted April 12, 2015 In his early posts and his ad I get credit. In that post it sounds like his design. “There is no limit to the amount of good you can do if you don't care who gets the credit.” Attributed to Ronald Reagan, and others in various forms back to 1863. http://quoteinvestigator.com/2010/12/21/doing-good-selfless/ As long as he is buying the boards from me, and doesn't deliberately mislead, I can roll with it. But thanks for asking. I do appreciate that greatly.
tz89 Posted April 15, 2015 Author #60 Posted April 15, 2015 I'm going to build a couple complete boards with my new black label boards. If anyone wants one of them, either as a 4 or 6 cylinder setup, PM me.
tz89 Posted May 4, 2015 Author #61 Posted May 4, 2015 Verical is selling the sensors for $10! That really helps. https://www.verical.com/pd/freescale-pressure-sensor-MPXV6115VC6U-253910
tz89 Posted May 4, 2015 Author #62 Posted May 4, 2015 Did he give you credit for your work? Now he has put together his own configuration and doesn't mention where anything came from. Of all the forums I've seen, this one is still the best. Best $12 ever!
videoarizona Posted May 5, 2015 #63 Posted May 5, 2015 (edited) Verical has a minimum of 6 units.....anybody want 2? Sorry to hear the person you were good to has taken advantage of you and your work. Maybe we should all go over to his posts and mention that your boards look great! I just went on his site and left him a polite email.... david Edited May 5, 2015 by videoarizona Add
tz89 Posted May 5, 2015 Author #64 Posted May 5, 2015 (edited) I posted everything on Github to encourage open source collaboration. Anyone and everyone can take that and run with it then give back. If you have electronics, software or box building skills go for it. He has and did a fairly good job. In the online economy it is always better to attribute and say thank you (both are free) than create ill will or even just suspicions (which may not be free). Life is short and the internet remembers forever. Edited May 5, 2015 by tz89
tz89 Posted May 5, 2015 Author #65 Posted May 5, 2015 No need to bug him. What I like about this group is that we are a model of good forum behavior. Everyone should be so lucky. Maybe the bosses should tame Congress next.
tz89 Posted July 4, 2015 Author #66 Posted July 4, 2015 A friend built a box. Looks pretty good, and functions just fine, but not a real solution.
Vonwolf Posted August 12, 2015 #68 Posted August 12, 2015 Verical is selling the sensors for $10! That really helps. https://www.verical.com/pd/freescale-pressure-sensor-MPXV6115VC6U-253910 Verical's site says the minimum order is either 40 unit's from Hong Kong or 20 from the Netherlands? It's been a few months, did they change the minimum or am I reading this wrong? Mouser is a little more expensive, but it doesn't look like they have a minimum order so are they the one to go with?
tz89 Posted August 13, 2015 Author #69 Posted August 13, 2015 They have run that sale price a few times with different minimums and may again. Normally it is best to order all the parts from Digi-key in one go. Saves on shipping which will add up if you start ordering from multiple sources.
Vonwolf Posted August 13, 2015 #70 Posted August 13, 2015 (edited) Thank's I just saw Digi-key has the for the same $14.47 for the pressure sensors so yes its best to buy from them for all but the UNO R3 Board, they really can get you with shipping. Thanks for a good package I think it's all coming together for me Edited August 13, 2015 by Vonwolf
tz89 Posted September 5, 2015 Author #71 Posted September 5, 2015 Everything is now on Github. Code, 2 compiled versions ready to load, board files to make your own, the CD files with instructions and pictures. Everything. Just google 'github digital carb sync shield'. I do have some nice quality black label boards if you want to skip making your own. PM me or contact me through Github.
tz89 Posted October 28, 2017 Author #72 Posted October 28, 2017 I'll start bringing this up to date now that I have a tour deluxe to experiment on. I'll be looking for lessons learned from others syncing their second gen engines. Need to refine the RPM feature. It's a contest between responsiveness and jitter. I sold my 89 before I got it exactly the way I thought it needed to be. If any of you who built or bought one I can make the experimental software version available. Just contact me on digital carb sync dot com here.
eusa1 Posted October 30, 2017 #73 Posted October 30, 2017 interested in your product if it is a complete assembly, but don't care to build my own.??
tz89 Posted October 31, 2017 Author #74 Posted October 31, 2017 interested in your product if it is a complete assembly, but don't care to build my own.?? Email sent....Thanks for the interest.
tz89 Posted November 10, 2017 Author #75 Posted November 10, 2017 VideoArizona, your board is built. Just waiting for the processor to arrive...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now