Rear light bar

[Motiv]

Met a nice gentleman and his lady tonight, he was riding a 09 RSV and it sported a real nice rear tail/brake light bar. He bought the bike with it on and thinks it was a Yamaha product. Can anyone identify it? it had a tag on the backside with the numbers 250-4400.

http://i1352.photobucket.com/albums/q654/Pauljewl/20140927_191023_zpsqg0o9u9x.jpg

 

 

I also informed him about this forum and all the good tech on here, maybe he'll join?

[M61A1MECH]

That is not a Yamaha product it is an after market unit, there are a few folks that sell them, they come with out the chrome bezel most of the time, the chrome bezel can be obtained from most sellers.

I sell a plug and play kit that uses that light bar , but no chrome bezel, here is a link to my ad.

http://www.venturerider.org/classifieds/showproduct.php?product=4943&title=run-2fbrake-2fturn-light-bar-for-2nd-gen-venture&cat=35

 

I could probably find the chrome bezel if some one wanted one.

[Motiv]

I will PM you.

[M61A1MECH]

OK, be looking for it.

[Triple J]

I've got one of the ones M61A1MECH sells, Couldn't be happier. Really lights up the back end.

[gez]

I've got one of the ones M61A1MECH sells, Couldn't be happier. Really lights up the back end.

 

+ 1

[Freebird]

If you want the chrome, Diamond R Accessories offers it. Very nice product.

 

http://www.diamondraccessories.com/yamaha/yamahaproducts.php

[StarFan]

I bought a lightbar from superbrightleds.com because it is wider than the ones I have seen available. Here below is the link as well as some pictures.

https://www.superbrightleds.com/moreinfo/id-bars/braketurn-light-bar-tlb-r11/1027/2482/

I had a backing plate made out of mirror stainless steel to add a little chrome to it and make it wider. Also had some spacers made to bring the bar out a little. Bought a wiring harness from one of our members to have Brake lights, running lights and turn signals. SO when I hit the brake and make a turn signal the turnsignal side flashes on ione side and the brake light is still on on the other side.

Really bright and looks good in my eyes.

 

http://i1281.photobucket.com/albums/a501/jonaslill/Light%20bar/led-tail-brake-turn-light-bar-TLB-R11_size600_zps3c2b0619.jpg

 

http://i1281.photobucket.com/albums/a501/jonaslill/Light%20bar/2Lightbar_zpsf0414a16.jpg

 

http://i1281.photobucket.com/albums/a501/jonaslill/Light%20bar/1Lightbar_zpsa4b03587.jpg

 

http://i1281.photobucket.com/albums/a501/jonaslill/Light%20bar/SAM_2269_zps2863a5f9.jpg

 

http://i1281.photobucket.com/albums/a501/jonaslill/Light%20bar/7Lightbar_zpsd4bb7a65.jpg

[friesman]

Here is the one I bought, It came with all of the spacers, nuts bolts and the exact directions on how to hook it up on my Venture. It was easy, I did the install at PIP in about 10 minutes with a screwdriver and pliers. It really lights up the back now!!!

 

http://www.ebay.com/itm/Yamaha-Royal-Star-Venture-LED-Brake-Running-Light-Bar-/231272274949?pt=Motorcycles_Parts_Accessories&hash=item35d8e6dc05#ht_1211wt_925

[djh3]

Before Steve started making his or I knew he made his anyways I use like just a piece of 1/4" ID alum tube from home depot. I polished it up with chrome polish and installed some longer screws as the one picture shows. Steves plug makes it a whole bunch easier even if you buy the light bar elsewhere, I bet he can make you a plug and you can connect the wires up. Much better then the scotch lock deals. yuck

[Condor]

I bought a lightbar from superbrightleds.com because it is wider than the ones I have seen available. Here below is the link as well as some pictures.

https://www.superbrightleds.com/moreinfo/id-bars/braketurn-light-bar-tlb-r11/1027/2482/

 

Interesting. Did you have to run the wiring thru a 5 to 4 isolator/convertor??

[M61A1MECH]

Jack,

Jonas (StarFan) purchased two harnesses that go to my run/turn/brake light bars from me, one for his bike and one for a friend, for use with the light bar he had already purchased.

My harness that goes with the run/turn/brake light bar is similar to a 4 to 5 wire convertor.

I thought you bought a couple of those from me.

[Mike G in SC]

Buy Steve's!

 

His wiring worked great with mine (which already had other stuff wired in).

[syscrusher]

That's a pretty effective looking signal array!

 

 

[quote=StarFan;864828

Really bright and looks good in my eyes.

 

http://i1281.photobucket.com/albums/a501/jonaslill/Light%20bar/7Lightbar_zpsd4bb7a65.jpg

Edited September 29, 2014 by syscrusher
eek

[Condor]

Jack,

Jonas (StarFan) purchased two harnesses that go to my run/turn/brake light bars from me, one for his bike and one for a friend, for use with the light bar he had already purchased.

My harness that goes with the run/turn/brake light bar is similar to a 4 to 5 wire convertor.

I thought you bought a couple of those from me.

 

Yep, good memory Steve... And I picked up one of your plug and play light bars too... , but alas I haven't installed anything yet. Since my wife passed my 'Honey Do's' are worse than ever.... I think she's getting even....

[StarFan]

Jack,

Jonas (StarFan) purchased two harnesses that go to my run/turn/brake light bars from me, one for his bike and one for a friend, for use with the light bar he had already purchased.

 

Yes, I bought the harnesses from Steve. What a great product and it is a simple plug and play thingie. Before getting Steve´s harness I had the light bar hooked up with only running and brake lights - no turn signals. Was frustrated since I wanted the whole package so to speak. Wrote a short message on the forum and Steve replied immediately and told me about his harness. He went out of his way to ship this to me as fast as possible and gave me all and every information needed as well as explaining how his harness works (still I don´t have a clue about how this works but don´t need to - IT WORKS

Am at the moment installing the bar and the harness to my friends bike.

 

Thanks again Steve for your great product and your helpfulness