Jump to content

Recommended Posts

Posted

That wood is for building and if you use it for fire wood the elves of the forest will take up residence in your attic.

 

Now I for one would be inclined to purchase said wood for a nominal amount. That is if you deliver it.

 

:farmer:

Posted
No air space, Kiln dried, and easily stackable. And only 4 miles from my work place.

 

Doesn't that take all the FUN out of felling, cutting and splitting firewood ? oooops, I forgot trying to stack split cordwood.

 

You're not even going to have to contend with ants and other critters associated with cordwood.

 

(good job & GREAT find ! )

Posted

My father use to get scrub-oak from the place he worked, they would use it as cribbing when moving steel with the overhead cranes. The mill on-site would even break it down to 18" pieces for us and he'd fill the back of his van once a month. Stuff burned great in their stove.

Posted
No air space, Kiln dried, and easily stackable. And only 4 miles from my work place.

 

That looks like redwood or cedar. Cut-offs from a planing mill? Too nice for firewood. In fact, redwood and cedar don't make very good firewood and will deposit a LOT of creosote like stuff in your chimney.

If you ARE going to store it outdoors, 'stickers' should be placed between each layer and an air space between each piece. I know you aren't worried about air circulation to facilitate drying since it is kiln dried, but stacking those pieces tightly together will encourage mold and insects (and rot, if not redwood).

Posted
Doesn't that take all the FUN out of felling, cutting and splitting firewood ? oooops, I forgot trying to stack split cordwood.

 

You're not even going to have to contend with ants and other critters associated with cordwood.

 

(good job & GREAT find ! )

 

I have several trees to fall for all the pleasurable experience I would not want to miss out on. Recently purchased a 12,000lb winch with a snap block pully. This will start i September for firewood next winter.

Posted
That looks like redwood or cedar. Cut-offs from a planing mill? Too nice for firewood. In fact, redwood and cedar don't make very good firewood and will deposit a LOT of creosote like stuff in your chimney.

If you ARE going to store it outdoors, 'stickers' should be placed between each layer and an air space between each piece. I know you aren't worried about air circulation to facilitate drying since it is kiln dried, but stacking those pieces tightly together will encourage mold and insects (and rot, if not redwood).

 

 

It is Fir. And yes, I do plan on stacking it with spacers in between.

Posted
I have to agree that that is to nice for firewood, I would have to build something out of it.

 

 

I origionally bought it for firewood.

 

What creative building suggestions do you have.

Posted

Back in the early 60's we had a local business, in Alhambra, Ca., that turned wood products. Table legs, model airplane wheels, etc... They would buy cheap hardwood and cut the checks, splits, and knots out and toss them. We'd go over and fill the bed of the pickup with wood to burn in the fireplace. Great stuff, and a bed full would last us about a month... Hey it was L.A./SoCal.... :)

Posted
I have to agree that that is to nice for firewood, I would have to build something out of it.

 

I origionally bought it for firewood.

 

What creative building suggestions do you have.

 

I know, I know, I got this Flyinfool.. I float bridge across Lake Michigan with a toll gate on it for the boats:cool10:

 

GREAT find there G&V - that is an AWESOME stack of lumber no matter how you look at it!!

Posted
I origionally bought it for firewood.

 

What creative building suggestions do you have.

 

Depends on the length of the pieces and their dimensions, if they are 4x4 and ten feet or better they would make great support posts for a deck, garage, yard awning for cookouts or whatever your mind comes up with.

 

:farmer:

Posted
Depends on the length of the pieces and their dimensions, if they are 4x4 and ten feet or better they would make great support posts for a deck, garage, yard awning for cookouts or whatever your mind comes up with.

 

:farmer:

 

The are 6x6x24 (inches)...

 

They will be stacked on the edge of my cement drive on bricks to keep them off the wet cement in winter. Also next to my table saw so I can cut them easly into 1 ft halves.

 

Keep the ideas coming....

Posted
The are 6x6x24 (inches)...

 

They will be stacked on the edge of my cement drive on bricks to keep them off the wet cement in winter. Also next to my table saw so I can cut them easly into 1 ft halves.

 

Keep the ideas coming....

 

At 24" length, you need to use them as firewood.

 

:farmer:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...