Need Really Strong, Thin Double Back Tape.

[GolfVenture]

This Blue Tooth came off my helmet in an accident. I striped and cleaned the surface on both the Blue Tooth and the new Helmet. Put on what I thought was a strong double sided tape. But over a couple of months the tape gave up.

 

The Blue Tooth is behind the brown double sided tape that I pealed off.

 

Any good suggestion?

[Freebird]

What kind of tape did you use? The 3M tape with the red backing is good. Available at most Automotive parts stores. Clean both surfaces with alcohol before putting it on.

[Venturous Randy]

I went to an auto paint supply store and bought some trim/badge insulation tape. It seems to be very strong and weather and heat proof.

RandyA

[Wade 2000]

What kind of tape did you use? The 3M tape with the red backing is good. Available at most Automotive parts stores. Clean both surfaces with alcohol before putting it on.

 

I'll put a second to this as I have mounted many things with this tape and never had anything lose grip

[Caveman]

Just another possibilty...velcro. I have used the 3m automotive trim tape and it will hold it also. Velcro..easy to remove and replace if needed.

[GolfVenture]

Velcro or 3M. I'll experment. Thank You everyone.

[Marcarl]

I use the 3m stuff mostly,, put some stuff on the Venture 10 years ago and it's still there as it was then.

It's a little thick so if I need something thinner I use UGlu. It thin, absolutely miserable to work with, super sticky, and you need a world of patience, but it works!

http://www.13deals.com/images/products/uglu_offer_01.jpg

[Barrycuda]

What kind of tape did you use? The 3M tape with the red backing is good. Available at most Automotive parts stores. Clean both surfaces with alcohol before putting it on.

 

Don is correct, this stuff is pretty good....

[jakester]

3m vht (very high tach)

Bill

[Tensilon]

Ditto on the 3M automotive grade double-sided trim adhesive tape;)

[tz89]

It's called 3M molding tape. It's seriously sticky!