tz89 Posted August 11, 2014 #1 Posted August 11, 2014 (edited) I get an intermittent miss on cold idle with the choke on. Not constant but intermittent. Once the bike warms up it idles fine. Bike runs fine at speed. I put on all new plug wires and caps (one was corroded with high resistance the rest were spec) and hoped it would clear up. Is this more likely a carb, coil or other ignition issue? Thanks Edited August 12, 2014 by tz89
utadventure Posted August 11, 2014 #2 Posted August 11, 2014 take the temp of the header pipe of each cylinder with a laser temp gauge. That should tell you which cylinder you have to pay attention to.
tz89 Posted August 14, 2014 Author #3 Posted August 14, 2014 I'm still trying to come up with a plausible theory for an intermittent misfire when cold.
Neil86 Posted August 14, 2014 #4 Posted August 14, 2014 Check for any vacuum leaks around carbs and intake...probably more sensitive to extra air at idle and cold.
tz89 Posted August 15, 2014 Author #5 Posted August 15, 2014 I should have noticed and paid more attention to the wandering idle speed. A good indicator of an air leak. This morning I replaced the cracked vacuum port caps. I noticed improved cold idle and didn't notice any missing, but I had to get to work so haven't done any real testing. Could it be that simple?
tz89 Posted August 16, 2014 Author #7 Posted August 16, 2014 Done. It could use a sync now but until my brother sends back the digital carb sync I built (see write up) it will wait. Thanks for the help. Best $12 ever.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now