ENG2242 Posted July 13, 2014 Share #1 Posted July 13, 2014 On vacation and hit 600 miles and have to change the oil. No real choice but t go with Mobil 1 RT synthetic 10-40. Please advise on how many quarts with new filter? Thank-you David 2013 RSV Link to comment Share on other sites More sharing options...
awsmsrv Posted July 13, 2014 Share #2 Posted July 13, 2014 About 3.5 qts. When bike is level, middle of sight glass. Link to comment Share on other sites More sharing options...
ENG2242 Posted July 13, 2014 Author Share #3 Posted July 13, 2014 Thank-you, I was never told about a sight glass. My paperwork is at home. I want to confirm its near the right knee. Link to comment Share on other sites More sharing options...
Bert2006 Posted July 13, 2014 Share #4 Posted July 13, 2014 Thank-you, I was never told about a sight glass. My paperwork is at home. I want to confirm its near the right knee. Its actually on the bottom right of the engine. Link to comment Share on other sites More sharing options...
steamer Posted July 13, 2014 Share #5 Posted July 13, 2014 behind your right floorboard. Link to comment Share on other sites More sharing options...
friesman Posted July 13, 2014 Share #6 Posted July 13, 2014 I use a mechanics mirror on a collapsible stick to hold down there and check my oil as I have to hold the bike upright to get a proper reading.... less than 10 pucks Brian Link to comment Share on other sites More sharing options...
Mike G in SC Posted July 13, 2014 Share #7 Posted July 13, 2014 I use a mechanics mirror on a collapsible stick to hold down there and check my oil as I have to hold the bike upright to get a proper reading.... less than 10 pucks Brian Yep, that and a small flashlight. But,, just changed oil today. 3.5 qts will put you right at the top of the glass. Some say half way. But 3.5 is okay,,, will not blow excess. Link to comment Share on other sites More sharing options...
bmxndad Posted July 13, 2014 Share #8 Posted July 13, 2014 Never put more than 3 quarts in my 99. Link to comment Share on other sites More sharing options...
darthandy Posted July 14, 2014 Share #9 Posted July 14, 2014 Yeah, mine rarely takes much more than 3 litres (Which is close to a quart) no matter how long I let things drain. And if I went over the half way mark on the sight glass, I did get excees blowing out the vent tubes. Andy Link to comment Share on other sites More sharing options...
VentureFar Posted July 14, 2014 Share #10 Posted July 14, 2014 Ha, this reminds me of my first post on this forum. "When will my 07 RSV stop marking its territory? " Turns out the dealer overfilled the bike when I bought it and it really does BLOW out and DRIP out. VentureFar... Link to comment Share on other sites More sharing options...
dacheedah Posted July 14, 2014 Share #11 Posted July 14, 2014 remember, middle with bike upright not on side stand. Link to comment Share on other sites More sharing options...
Marcarl Posted July 14, 2014 Share #12 Posted July 14, 2014 Oil change at 600 miles???? or was that suppose to read 6000? Link to comment Share on other sites More sharing options...
eusa1 Posted July 14, 2014 Share #13 Posted July 14, 2014 I have never put more than 3 quarts with filter in mine, as my prev ventures would spit too much oil into the air box plenum . it will read at 1/2 window with this amount of oil and bike upright and level the mfg recommends the first oil change at 600 because of debris from break in and manufacturing process Link to comment Share on other sites More sharing options...
videoarizona Posted July 14, 2014 Share #14 Posted July 14, 2014 I have a question: Looking underneath bike and can see the plug for the oil drain. HOWEVER, there is a Phillips head screw in the middle??? Is this for real or did a PO get fancy and drill a hole in the drain plug so he/she could dribble out a few teaspoons after overfilling? (my guess) Well two questions: I remember a post at some point that mentioned another drain plug that would get more oil out....searching didn't help...anyone remember? Thanks, as always! Oh..my Walmart does not carry a filter that fits...nor does any auto parts store near me. Have to ship one in from Phoenix. O"Reily's (sp?) can order it. Link to comment Share on other sites More sharing options...
Pegasus1300 Posted July 14, 2014 Share #15 Posted July 14, 2014 No the JIS head screw is for real. If you take it out you can take out the magnetic post and clean it. Funny little thing but there it is. Link to comment Share on other sites More sharing options...
Venturous Randy Posted July 14, 2014 Share #16 Posted July 14, 2014 If it were me, I am not sure I would go to synthetic oil at 600 miles. The reason being is that the rings may not be sufficiently broken in at that point, especially if the bike has been run at consistent RPM's, as on an interstate. What helps rings seat better is to do open throttle runs at lower RPM's at from slightly above lugging the bike as this causes gas pressures to push outward on the rings and they break in better. If you go to synthetic oil too soon, you may have such good lubrication that the rings do not break in well enough. Now, I know this is old school and this may not matter with the improvements we now see in today's machining, but that's my story and I'm sticking to it. RandyA Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now