Jump to content
IGNORED

New tach installed

Carbon_One

By Carbon_One
in Watering Hole

 Share

Recommended Posts

Carbon_One

Carbon_One

Posted
Posted

Today I finished my tach install. Here's the link to the one I used -- http://www.ebay.com/itm/281251433529?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

There's no name on it so can't say for sure who makes it but it looks and functions exactly like the Drag Specilities tach I had on my 05 trike.

I used a Kuryakyn "P" clamp to mount it to the handle bar rather than the one provided. I did that the get the gauge in the spot where I wanted it, as well as the angle needed for viewing better.

Wiring it was very simple. The four wires, red power, yellow - lighting, black - ground, and green negative post of the #4 cylinder coil (white wire). The light in the tach was a nice shade of blue. Tach accuracy was good with no bouncing needle.

http://i.ebayimg.com/00/s/NjU1WDYwMA==/z/DYcAAMXQEgpTEQwu/$_1.JPGhttp://i.ebayimg.com/00/s/NTM4WDYwMA==/z/Uu8AAOxy4fVTEQwy/$_1.JPG

djh3

djh3

Posted
Posted
This one a fellow was installing and I think had to hook 2 leads to 2 different coils or something to get the RPM to read right. It looks almost like and autometer.
djh3

djh3

Posted
Posted

The cart button is on only your computer man. I didnt push it. :no-no-no:

Your not alone though it causes me troubles also. I read stuff and then wonder about fixing or modifying mine. Same with adding some of the parts. But good thing I'm not a chrome guy I guess. I dont like polishing the stuff.

Wizard765

Wizard765

Posted
Posted

My MM came with a Baron's Tach mounted on top of the brake master.. looks great and works great except at idle. At idle the needle bounces and is pretty much useless but once off idle it's rock solid.. sounds like yours Larry with the blue backlight etc.. just says Barons on it.. I wonder if there is something I can do about the bouncing needle at idle?

Carbon_One

Carbon_One

Posted
  • Author
Posted
A lot like the tach I install, don't you want some gages to go with it.[ATTACH]85663[/ATTACH]

I thought about the set up you have but decided all I really needed (wanted) was a tach & voltmeter. I already had the voltmeter that I had on the previous trike so used it again.. Between these two gauges I know almost all there is needed to know what's going on with the engine and electrical system.

The gauge pods do look awesome thou.

Larry

Carbon_One

Carbon_One

Posted
  • Author
Posted
My MM came with a Baron's Tach mounted on top of the brake master.. looks great and works great except at idle. At idle the needle bounces and is pretty much useless but once off idle it's rock solid.. sounds like yours Larry with the blue backlight etc.. just says Barons on it.. I wonder if there is something I can do about the bouncing needle at idle?

 

I had a Baron's tach like yours given to me. Didn't use it due to where my GPS is mounted and wouldn't of been able to see the tach mounted on the reservoir. As to the bouncing needle I've heard others commenting on that too and as far as I know one just deals with it.

Larry

videoarizona

videoarizona

Posted
Posted

I have a Baron's on my 950T. It bounces like crazy at idle and slowly gets better at higher RPMS. I've never been able to find a cure. Baron's says it shouldn't do it.

 

I was thinking it was my installation since I had to take two leads from the 2 cylinders to get an accurate reading. Guess not...cheap tach most likely. No dampening...

XV1100SE

XV1100SE

Posted
Posted

FYI... when I ordered my tach the paypal info said the company name was Demon's Cycle South Inc. A google search for their web site shows that they rate an 'F' with the Better Business Bureau - 22 complaints closed with BBB in last 3 years | 0 closed in last 12 months - See more at: http://www.bbb.org/south-east-florida/business-reviews/motorcycles-supplies-and-parts/demons-custom-cycles-south-in-pompano-beach-fl-30005550#sthash.9DybEC0f.dpuf

 

Ebay shows them as 98.1% Positive feedback

 

Larry had no issues with them and as far as I know I won't either. Just making sure keep this in mind if they order a tach.

Carbon_One

Carbon_One

Posted
  • Author
Posted (edited)

On the tach seller, I never even looked at the their e-bay rating. It was a reasonable price, they shipped it in a timely matter, and works great so no complaints from my end of the transaction.

For the voltmeter gauge a couple others have asked where I got it so here's the following info on that:

http://www.amazon.com/dp/B0041QJQNQ/?tag=googhydr-20&hvadid=53463800489&hvpos=1t2&hvexid=&hvnetw=s&hvrand=11675153993203974341&hvpone=&hvptwo=&hvqmt=e&hvdev=c&ref=pd_sl_1q412ul70y_e

 

A search on digital voltmeters on the web and e-bay show a few other choices but this one looks great and seems to be water proof as it's been on the bike for a while now. The handle bar clamp I made out of some stainless sheet metal. I added a couple steel spacers under it that fits into the recessed cap holes. That allows the plate to lay flat.

Larry

Edited by Carbon_One
  • 4 weeks later...
XV1100SE

XV1100SE

Posted
Posted

Got my tach on Friday and looking at how to install it I tried to bend the mounting bracket that comes with the tach. Word of advice....don't try to bend it.

 

I put it in a vice and tried to bend it by hand. The "metal" snapped. I had a shop make one for me with a slightly longer "tongue". I ended up getting two done even though I only need one...so if anyone needs a bracket, let me know.

 

Forecast is for rain tonight and tomorrow so will install it tomorrow night. Doing maintenance at the same time - oil change, change spark plugs, carb synch (62,000 km in 4 years).

Dano

Dano

Posted
Posted
A lot like the tach I install, don't you want some gages to go with it.[ATTACH]85663[/ATTACH]

 

I have been thinking about wanting..errr...NEEDING a set of those instead of the tape storage device. Still got them?

Condor

Condor

Posted
Posted
I have been thinking about wanting..errr...NEEDING a set of those instead of the tape storage device. Still got them?

 

Ponch was the one that developed that cluster Dan. Sure do miss him....

 

Dano

Dano

Posted
Posted
Ponch was the one that developed that cluster Dan. Sure do miss him....

 

 

Sure wish someone would duplicate, I'm not THAT advanced yet.....

 

Thanks for the reminder Condor, I tend to forget some of these things...:whistling:

Condor

Condor

Posted
Posted
Sure wish someone would duplicate, I'm not THAT advanced yet.....

 

Thanks for the reminder Condor, I tend to forget some of these things...:whistling:

 

There were a couple of members who made their own. I think it would be right up your alley, being electrical and all.... :) I think that if anyone contacted Ponch he'd be willing to pass on some pointers?? If I remember the biggest problem was finding the right sized gauges....

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...