darthandy Posted July 7, 2014 Share #1 Posted July 7, 2014 As I was searching online for prices on air filters for my RSV (Thinking of going K&N), I ran across a Motorcycle Superstore section that said the Royal Star / Tour Deluxe / Venture need two filters. The RSV shop manual only shows one in the section on cleaning it. Have I been cleaning only half my air filters? Is there another one on the other side that I should know about? Andy Link to comment Share on other sites More sharing options...
Sailor Posted July 7, 2014 Share #2 Posted July 7, 2014 The Venture I have (02) has one on each side. Link to comment Share on other sites More sharing options...
jakester Posted July 7, 2014 Share #3 Posted July 7, 2014 Yea what he said. One on each side for the 2000 RSV. Bill Link to comment Share on other sites More sharing options...
IronMike Posted July 7, 2014 Share #4 Posted July 7, 2014 My 07 has two. They are ideally placed to avoid sucking in a lot of forigen material. Mine have 20k mikes on them and of that 10.500 mi are mine. They are like new. The way it is arranged they both deliver air to a central point so you could actually clean one with no harm. Its not like one is dedicated to two cylinders. The two of them deliver air to a central point. If you are shooting say deep creep in there. You have to aim at the center or soak the filter on the far side. Keep in mind. Link to comment Share on other sites More sharing options...
slowrollwv Posted July 7, 2014 Share #5 Posted July 7, 2014 There is two on the RSV and TD. I got a set of filters about six years ago to replace my old ones. Took them out and washed them in soapy water and let them air dry for a day or so and they were good to go for the next change. Have not bought filters anymore just lightly wash and dry and go. Link to comment Share on other sites More sharing options...
darthandy Posted July 7, 2014 Author Share #6 Posted July 7, 2014 Thanks guys. And it only took two years to get this figured out. Now to go and kick the shop manual. Andy Link to comment Share on other sites More sharing options...
eusa1 Posted July 7, 2014 Share #7 Posted July 7, 2014 easy answer is this, if your "royal star" venture or tour deluxe came with factory cruise control, then it has 2 air filters. no connection, just an observation Link to comment Share on other sites More sharing options...
Barrycuda Posted July 8, 2014 Share #8 Posted July 8, 2014 two, to, too, 2 filters Link to comment Share on other sites More sharing options...
billmac Posted July 8, 2014 Share #9 Posted July 8, 2014 Thanks guys. And it only took two years to get this figured out. Now to go and kick the shop manual. Andy That's what happens when you just look at pictures and not read. Link to comment Share on other sites More sharing options...
darthandy Posted July 8, 2014 Author Share #10 Posted July 8, 2014 That's what happens when you just look at pictures and not read. I was supposed to read? Now they tell me! :bang head: (Actually, if you go to page 3-29 and 3-30 , Cleaning the Air Filter Element, it only shows an air filter on one side and only talks about one air filter. It may say two elsewhere, but not here which is where I was looking.) Andy Link to comment Share on other sites More sharing options...
Dragonslayer Posted July 8, 2014 Share #11 Posted July 8, 2014 Have I been cleaning only half my air filters? Is there another one on the other side that I should know about? AndyYes you have, and yes there is...... on the other side of the bike. Link to comment Share on other sites More sharing options...
Dragonslayer Posted July 8, 2014 Share #12 Posted July 8, 2014 Thanks guys. And it only took two years to get this figured out. Now to go and kick the shop manual. Andy My advice is don't believe everything you read... especially in shop manuals. Link to comment Share on other sites More sharing options...
darthandy Posted July 10, 2014 Author Share #13 Posted July 10, 2014 My advice is don't believe everything you read... especially in shop manuals. Yeah, tell me about it! I had to tighten a bolt on my Triumph and the factory manual said it needed 89 ft-lb of torque. That seemed very high for a fairly small bolt so I went onto the Triumph forum to ask about it. I was told that I had an early edition manual and that I should look at the revised edition as the bolt in question probably required around 40 ft-lb. I got and checked the revised manual and sure enough, the torque for that bolt was 39 ft-lb.! Don't you love manufacturers and their accuracy. Andy Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now