camos Posted June 29, 2014 #1 Posted June 29, 2014 I just ordered a SnaggleSTUD for my newly acquired Garmin 2598 and now need to get a mount to for it. Has anyone tried one of these "waterproof" GPS mounts? They are relatively inexpensive and come with a handlebar clamp. http://www.aliexpress.com/item/GPS-SAT-NAV-Waterproof-Case-Mount-Holder-for-ATVs-Garmin-nuvi-2595LMT-2555LMT-2555LT-Black/1394973048.html
Peder_y2k Posted June 29, 2014 #2 Posted June 29, 2014 Looks like an OK deal for those who don't have a waterproof GPS. Ya pays yer money and takes yer chances. If it fits, wear it! It's only $14 - the price of fish & chips. -Pete, in Tacoma WA USA
djh3 Posted June 29, 2014 #3 Posted June 29, 2014 Some I have read have a hard time occasionally to get the GPS to switch screens or program thru the cover. I personally use the RAM Mount and ole zip lock bag if necessary. Crude but effective.
Bob Myers Posted June 29, 2014 #4 Posted June 29, 2014 Some I have read have a hard time occasionally to get the GPS to switch screens or program thru the cover. I personally use the RAM Mount and ole zip lock bag if necessary. Crude but effective. I had one of those, it fell off my Vulcan up in Indiana some where, if my gps had not been wired it would have been road trash instantly. Like most, I use the sandwich bag method, rode through adownpor today, uncovered and it didn't affect it at all-this time
djh3 Posted June 29, 2014 #5 Posted June 29, 2014 I have had a couple of the ummmm less expensive type phone mounts shall we say. And like someone else said ya get what you pay for. One of the phone mounts lasted about a month. Mount similar to this one he has pictured. I think the piece right where it goes to the handlebar fixture gave up the ghost. Lucky for me I was pulling up to a pump @ a gas station and was about 5 mph and cord attached, so it just plopped ont eh tank. The other was a much better outcome. I actually just replaced it with a RAM mount one. I have had the knock off one since like 2008. But very similar mount to handle bars as RAM. Behind the fairing and even just the windshields like the TD if mounted in rite place they wont hardly get wet unless its a downpour.
darthandy Posted June 29, 2014 #6 Posted June 29, 2014 Givi (The luggage people) make one that looks identical but costs $65 up here in the Great White North. I bought one a few years ago and it came with a separate "rain cover". It can be frustrating to use as pressing on one spot causes the whole plastic cover to press down and sometimes activates something else on the screen. It's even worse with gloves on. And where the plastic cover joins the case, there is a bit of a sloped area that tends to reflect light and distort the edges of the screen. Things are even worse if you upgrade to one of Garmin's 5 in. screen units. Bottom line is - I wish I had gone with a Ram mount right off the bat and that is what I will be doing shortly. The case as shown is more trouble than it's worth. And at that price, I'd worry about durability and the ability to stay on the bike! Andy
camos Posted June 30, 2014 Author #7 Posted June 30, 2014 I like durable better than cheap. The way the Garmin suction mount connects to the back of the GPS also looks like a weak point. How does the RAM system attach? I'm only familiar with the ball part of it but not with how the GPS is actually held. Coming back from The Dalles there were a few bikes at the hotel we were staying at that had mounts that clamped around the ends of the GPS. Looked solid but couldn't identify the manufacturer. Didn't look like the mount was waterproof either. More research seems to be required. Thanks for the advice guys. I'm sure my GPS will thank you as well.
Bob Myers Posted June 30, 2014 #8 Posted June 30, 2014 they were likely RAM mounts, I have one for my Nuvi350 and it wraps like you describe. Found one for a Tom-Tom, it also wraps around.
djh3 Posted June 30, 2014 #9 Posted June 30, 2014 http://www.rammount.com/Gallery/images/RAM-HOL-GA26U/RAM-HOL-GA262.jpg GPS sits down in lower lip and then tilt up and it "snaps" in with clip in center. I bought an X mount they have for my phone. Actually I bought an kit with the arm and handlebar mount for a Tom Tom and the X mount separate. It was cheaper than ordering up the X mount specifically once I found what I wanted on e-bay. lol
Barry.B Posted June 30, 2014 #10 Posted June 30, 2014 I have one on my bike but I have my Sirius Radio in it and it works good to keep water off it Barry:thumbsup2:
camos Posted June 30, 2014 Author #11 Posted June 30, 2014 Went to RAM and according to the wizard these parts are what I need to mount it. The cradle holder: http://www.rammount.com/CatalogResults/PartDetails/tabid/63/partid/082065077045072079076045071065053055085/Default.aspx The mount: http://www.rammount.com/CatalogResults/PartDetails/tabid/63/partid/082065077045066045049055052085/Default.aspx Pretty sure I saw a simpler ball mount somewhere. Their site sure doesn't make it easy to find what you want. Think I'll look on eBay next.
camos Posted June 30, 2014 Author #12 Posted June 30, 2014 I have one on my bike but I have my Sirius Radio in it and it works good to keep water off it Barry:thumbsup2:Are you referring to the case mount that I mentioned first?
kevin-vic-b.c. Posted June 30, 2014 #13 Posted June 30, 2014 I like durable better than cheap. The way the Garmin suction mount connects to the back of the GPS also looks like a weak point. How does the RAM system attach? I'm only familiar with the ball part of it but not with how the GPS is actually held. Coming back from The Dalles there were a few bikes at the hotel we were staying at that had mounts that clamped around the ends of the GPS. Looked solid but couldn't identify the manufacturer. Didn't look like the mount was waterproof either. More research seems to be required. Thanks for the advice guys. I'm sure my GPS will thank you as well. I can show you how my ram system connects Clive. It is what I would recommend over the suction cup. I had suction cups on the last GPS but it shook to death. 1st gen will connect to the bike differently but similar to the gps. Try looking in here: http://www.gpscity.ca/ram-mount
djh3 Posted June 30, 2014 #14 Posted June 30, 2014 Not big on suction cup mount. I have seen some with it on a second gen last yer up in NC. I thought it was pretty amazing it stayed on. When you go looking on e-bay put the model number in the search. like the GA57U and see what comes up. Biggest thing on the handlebar part is how long the arm is and where you want it to be. That one looks to be the typical I think 4" length. Check here for mount. Here for GPS part. You may be able to get both from same place and save shipping. Takes a little looking around.
bill4you502 Posted June 30, 2014 #15 Posted June 30, 2014 I just ordered a SnaggleSTUD for my newly acquired Garmin 2598 and now need to get a mount to for it. Has anyone tried one of these "waterproof" GPS mounts? They are relatively inexpensive and come with a handlebar clamp. http://www.aliexpress.com/item/GPS-SAT-NAV-Waterproof-Case-Mount-Holder-for-ATVs-Garmin-nuvi-2595LMT-2555LMT-2555LT-Black/1394973048.html I have one and mounting it on the right side of handlebars does not allow enough angle for proper viewing. I heated and bent the piece w/ the ball on the end, but, weakened it enough so that it broke under vibration. It also takes up a lot of real estate when mounted. My Garmin nuvi50 would not respond until I cut out the transparent, heavy Plexiglas shield! I'm lookin' for another answer myself!!!!!!!!!!!!
dvuch1 Posted June 30, 2014 #16 Posted June 30, 2014 What do you folks use for mount the weird shape of the 1st GEN handlebars. Ilike to put a cup holder and a phone mount but haven't found something to clamp that shape....ideas? Dave
Prairiehammer Posted June 30, 2014 #17 Posted June 30, 2014 (edited) What do you folks use for mount the weird shape of the 1st GEN handlebars. Ilike to put a cup holder and a phone mount but haven't found something to clamp that shape....ideas? Dave Snagglestuds from Bob Myers. http://www.venturerider.org/forum/showthread.php?p=846771#post846771 Edited July 1, 2014 by Prairiehammer
Barry.B Posted June 30, 2014 #18 Posted June 30, 2014 Are you referring to the case mount that I mentioned first? Yes I have not had any problems With mine . At first I did not like it to much but it grew on me . And keeps my sirius Radio dry Barry
Barrycuda Posted July 1, 2014 #20 Posted July 1, 2014 http://www.rammount.com/Gallery/images/RAM-HOL-GA26U/RAM-HOL-GA262.jpg GPS sits down in lower lip and then tilt up and it "snaps" in with clip in center. I bought an X mount they have for my phone. Actually I bought an kit with the arm and handlebar mount for a Tom Tom and the X mount separate. It was cheaper than ordering up the X mount specifically once I found what I wanted on e-bay. lol Same one I use and the Baggie over it. It has been tested in T storms and passes with flying colors...
Bob Myers Posted July 1, 2014 #21 Posted July 1, 2014 Snagglestuds from Bob Meyer. http://www.venturerider.org/forum/showthread.php?p=846771#post846771 Did you remove the nut and screw those on?
Prairiehammer Posted July 1, 2014 #22 Posted July 1, 2014 Did you remove the nut and screw those on? Um. Yeah. Isn't that how you designed them?
Bob Myers Posted July 1, 2014 #23 Posted July 1, 2014 Um. Yeah. Isn't that how you designed them? Yes, it just looked like the wrench hex was a long way from the bar. Looks like that hex could be scooted over a bit to provide a wee bit more clamping room.
Prairiehammer Posted July 1, 2014 #24 Posted July 1, 2014 Bob, don't change the location of the hex. When the Snagglestuds are fully screwed on, there is about an 1/8th inch clearance between the hex and the handlebars. In the pic, I didn't have the 'Studs fully tightened.
Bob Myers Posted July 1, 2014 #25 Posted July 1, 2014 Oh, so you did that on purpose to see if I would notice? I was about to pull up my drawing and change the location but I guess I better not.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now