Is it possible to reset the stereo settings to zero. Bass, treble, fader, etc...

[jurob]

It's a 2000 millenium and the UP button for radio station, bass, etc... Is not working.

 

The bass is at -6 and treble is at -2. Sound quality is horrendous and I'm sure would sound a whole lot better at 0 0 versus what it has now.

 

I took apart the fairing and the stereo controller so I'm pretty confident that it's the button versus a connection. Also disconnected the battery.

 

Tks!

[eusa1]

Disconect power to battery and it should reset

[jurob]

Tks for the quick reply, but that didn't work.

[eusa1]

Try pulling the head unit from the fairing and leaving it out for several minutes

[bongobobny]

Leave the battery disconnected for several hours, like overnight, that should do it...

[djh3]

To reset codes on my Durango, you have to disconnect the battery then turn the key on for a few moments. It drains the stored voltage I guess. I have not tried it on the bike.

[ReinyRooster]

Yes.....disconnecting the batter will work....I just did that last week and everything was reset back to zero.

[jurob]

It worked! Two hours and cycled the key on and off.

 

Might try reversing the pins temporarily so I can raise the bass and treble in the future.

[djh3]

I have seen one of those control units for sale somewhere in my ravels thru the internet in the last say 2 months. You might try splitting the fairing and some cleaning and dielectric grease on pins just for grins. Ya never know might be the magic trike.