Who would be interested in these?

[M61A1MECH]

I just installed a set of Harley tail/brake lights on a Venture, I made a pair of jumpers so there is no cutting or T-tapping into the existing wires was required. See the attachment for photos of the brake and taillight jumpers, each has single male bullet pin on one end and double female bullet on the other, with clear rubber boots. These plug right into the factory set ups behind the license plate.

 

I could supply these jumpers and a mating male bullet for you to attach to what ever you are wiring up for $3.00 each plus postage.

 

Trying to gauge interest, if there is enough I will post them on the classified sections under Member Vendors section.

 

Let me know what you think.

Thanks

[beltfed50]

I want to see the tail lights!!!

[M61A1MECH]

Here is a link to them on my bike.

http://s40.photobucket.com/user/royalsteve/media/VENTURE%20REAR%20LIGHTING/NOLIGHTSON.jpg.html?sort=2&o=2

[bongobobny]

Don't need them myself but I think it is a good item...

[WillyB]

Steve,

Where did you get the Harley Tail lights?

[M61A1MECH]

WillyB

 

I picked mine up at a local swap shop that goes on every month in Webster , Florida.

I hve been many times , sometimes they have them sometimes not, sometimes in good shape sometimes not.

 

I have also seen a few for sale here in the classifieds.

 

I have seen them on Ebay, I think they are out of production , so they are getting scarce.

 

There is a write up on installing them that Freebird did in the tech section for second gens if you are interested.

[WillyB]

Steve,

Thanks for the reply. I've been looking for a kit off and on for the last year or so. I checked with a Harley dealer and they are out of production.

[billmac]

found mine on e-bay a couple of months ago. $10.00 + $7.00 shipping. better shape than the picture showed.