a1bummer Posted May 31, 2014 Share #1 Posted May 31, 2014 Well, the trip was going well until this evening. I was on my way back north towards home after being on the road for 2 weeks, then either my stator or rectifier appear to have taken a dump. I managed to get myself into a hotel in south Jacksonville, Illinois. Not enough juice to get restarted. I found a loose positive battery cable half a tank back, but tightening it didn't appear to have helped. Anybody in the area with some jumpers and a volt/ohm meter that might be able to help me do some troubleshooting? I'm hoping the Captain & Coke will help knock me out soon so I can get some sleep. Then get at figuring how to get us both home. If anybody has any ideas, I'm in the Baymont Hotel in room 214, my cell # is 715-495-0171 Thanks in advance for any help, Bill Link to comment Share on other sites More sharing options...
etcswjoe Posted May 31, 2014 Share #2 Posted May 31, 2014 Sorry to hear about your issues, take a look at the VR assistance list http://www.venturerider.org/forum/showthread.php?t=45159 saw several folks in Il but not familiar enough to know which towns are close by. Link to comment Share on other sites More sharing options...
Flyinfool Posted May 31, 2014 Share #3 Posted May 31, 2014 (edited) If desperation kicks in I do have a new HO stator and HO RR that I bought for my '88 but have not got around to installing yet. I do not know if they will fit an 84 or not. But I am 300+ miles away in Milwaukee. About a mile north of you is a Firestone auto service, Don't know if they would even look at a bike. If yo go north to Morton Ave which is about 2 miles. There is a NAPA about a half mile east on Morton or a choice of Advance Auto, Carquest and O'Reillys in a clump about a mile west on Morton, and a Rexx Battery specialist another 2 blocks north on Main St. A couple of things you can check without tools. Find the 3 white wires that come up from the Stator check the connector for corrosion or signs of heat indicating a bad connection. Follow those wires to the RR. Check the connector on the other side of the RR for corrosion of signs of heat. If you are lucky one of these connectors will have a bad contact that you can just clean up and be back on your way. Edited May 31, 2014 by Flyinfool Link to comment Share on other sites More sharing options...
Flyinfool Posted May 31, 2014 Share #4 Posted May 31, 2014 So any luck getting back on the road? Link to comment Share on other sites More sharing options...
eusa1 Posted May 31, 2014 Share #5 Posted May 31, 2014 My sister lives in Jacksonville and came and got him on his way this morning, txt with him a while ago and he should be home tonight:cool10: Link to comment Share on other sites More sharing options...
a1bummer Posted May 31, 2014 Author Share #6 Posted May 31, 2014 Thanks everyone, I just pulled into Orlin and Sharron's in Viroqua a bit ago. Mike's lovely sister was kind enough yo give me a jump this morning and hot me back on the road. I just got on and booked it north as fast as I could. It started to charge better as I got closet, but its still not right. The volt meter hovers where it should, but when I turn on my LED's, the needle takes a dip. But for now, I called it quits in a good place. I'll update when I get home tomorrow. Thanks again everyone. Mike, please give your sister a big wet one for me, will ya? Link to comment Share on other sites More sharing options...
IH Truck Guy Posted June 1, 2014 Share #7 Posted June 1, 2014 Awesome work guys...... Link to comment Share on other sites More sharing options...
Flyinfool Posted June 1, 2014 Share #8 Posted June 1, 2014 Cool, Glad you are on the way. Did you find the gremlin yet? Link to comment Share on other sites More sharing options...
a1bummer Posted June 1, 2014 Author Share #9 Posted June 1, 2014 Well, made it home a bit ago. 2196.2 miles round trip. It was a good ride overall. The ride home from Illinois was a bit white knuckle with the charging problem. But after a jump from Mike's awesome sister in Jacksonville, Illinois, I got home without further incident. Stayed in Viroqua at Orlin & Sharon's last night and we put a battery charger on it over night for added insurance. Had a good long nights sleep and was back on the road home somewhere around 11ish. Time for something to eat now. Gotta call the landlord and ask him why the grass is up to my knees too. I'll poke around to see where the Gremlin is hiding later. I'm sure he won't be to tough to find. I'll let ya guys know what I find. Link to comment Share on other sites More sharing options...
a1bummer Posted June 4, 2014 Author Share #10 Posted June 4, 2014 Yup, stator is shot. Good voltage across two phases, but 1 volt across the third. That was easy. Now its just hurry up and wait for a new one. Bill Link to comment Share on other sites More sharing options...
Dragonslayer Posted June 4, 2014 Share #11 Posted June 4, 2014 Yup, stator is shot. Good voltage across two phases, but 1 volt across the third. That was easy. Now its just hurry up and wait for a new one. Bill Once you got the stator in hand it's an easy fix. Link to comment Share on other sites More sharing options...
Flyinfool Posted June 4, 2014 Share #12 Posted June 4, 2014 Once you got the stator in hand it's an easy fix. More like once you get the stator mounting bolts out it is an easy fix..... Link to comment Share on other sites More sharing options...
Dragonslayer Posted June 4, 2014 Share #13 Posted June 4, 2014 More like once you get the stator mounting bolts out it is an easy fix.....Your right, I had forgotten about that. Link to comment Share on other sites More sharing options...
a1bummer Posted June 4, 2014 Author Share #14 Posted June 4, 2014 I had put a new on in about 45,000 miles or o ago. Shouldn't be to much a problem this time. I also have the stator cooler coming this time too. Maybe it will help make it ls a it longer this time. Bill Link to comment Share on other sites More sharing options...
BradT Posted June 5, 2014 Share #15 Posted June 5, 2014 2,000 plus miles was a good trip and the ending was just a memory and it ended up pretty good. Glad you made it back as it is always more enjoyale fixing something at home, when you have a little more time. Brad Link to comment Share on other sites More sharing options...
a1bummer Posted June 5, 2014 Author Share #16 Posted June 5, 2014 2,000 plus miles was a good trip and the ending was just a memory and it ended up pretty good. Glad you made it back as it is always more enjoyale fixing something at home, when you have a little more time. Brad Couldn't have said it better myself. Link to comment Share on other sites More sharing options...
BradT Posted June 9, 2014 Share #17 Posted June 9, 2014 Last weekend we tried to get away 25 miles from home fuel pump decided to take a 15 minute break so back home we go to fix it in my garage. Ruined the weekend. You got away much better than I did Brad Link to comment Share on other sites More sharing options...
IronMike Posted June 9, 2014 Share #18 Posted June 9, 2014 I am needing the plug end of a bad fuel pump to do my Aircraft Pump Mod. If you or anyone has one, I'll take care of ya if you send it to me. I just need the wires and the plug of a Bad expired Pump! I am working on a plug and play spare parts list. Where everyone can buy the Aircraft Spruce pump put it together and have it at the ready. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now