1999 RSV Crash bars

[YamahaLarry]

Before I sell my VStar, I would like to transfer the highway pegs to my RSV. Problem is RSV engine guard diameter is only 1" and it is flimsy (I know I can get the kit on here to sturdy it up) and the engine guard on the VStar is 1-1/4" diameter.

 

Was wondering if this "crash bar" would actually bolt up to my 99 RSV. Does anyone know for sure?

 

CHROME-HIGHWAY-CRASH-BARS-SADDLEBAGS-GUARD-YAMAHA-ROYAL-STAR-1300-1997-2013-NEW

[eusa1]

no sir it will not, your rsv crash bar holds a bunch of other items that you can't see under the shields and plastic, fuses, cruise contole ...ect

[bigbob]

Before I sell my VStar, I would like to transfer the highway pegs to my RSV. Problem is RSV engine guard diameter is only 1" and it is flimsy (I know I can get the kit on here to sturdy it up) and the engine guard on the VStar is 1-1/4" diameter.

 

 

 

 

CHROME-HIGHWAY-CRASH-BARS-SADDLEBAGS-GUARD-YAMSTAR-1300-1997-2013-NEW

 

I transferred my Vstar pegs to my RSV by using a 1" inside diameter - 11/4" outside diameter brass bushing cut in half for a spacer. still good after 2 years.

 

Ride safe Bob

[djh3]

I had my Kuryakyn pegs on my 900 vulcan. Same thing, different sized bars. So I bought new clamps and transferred the peg part over. But I bet the bushing thing would work.

[bigbob]

I had my Kuryakyn pegs on my 900 vulcan. Same thing, different sized bars. So I bought new clamps and transferred the peg part over. But I bet the bushing thing would work.

 

 

 

Much cheaper

[YamahaLarry]

I transferred my Vstar pegs to my RSV by using a 1" inside diameter - 11/4" outside diameter brass bushing cut in half for a spacer. still good after 2 years.

 

Ride safe Bob

 

Thought about this option too, but didn't think about brass. Guess I will be making a stop at the hdwe store on the way home. Thanks!