Some close ups

[baylensman]

If your new to this I hope these help

 

inside of the bag showing which screws come of to remove bag[ATTACH]84755[/ATTACH][ATTACH]84757[/ATTACH]

 

The front and rear clmaps that hold the mufflers on[ATTACH]84756[/ATTACH][ATTACH]84758[/ATTACH]

[Kirby]

Yep, 4 screws inside bag, one bolt near rear axle, and clamp on front of muffler. Be careul not to lose the spacer between the bag and frame inthe top rear position.

[EasyRider]

each hole has two (2) rubber grommets and a spacer as well. Now if someone were to have one extra as my 2 year old must have helped mom clean the garage (or I dropped one ) and need one of the rubber grommets, any ideas ? Paypal and i are good buddies and you could be a good buddy too if you have an extra for sale!!

[BratmanXj]

each hole has two (2) rubber grommets and a spacer as well. Now if someone were to have one extra as my 2 year old must have helped mom clean the garage (or I dropped one ) and need one of the rubber grommets, any ideas ? Paypal and i are good buddies and you could be a good buddy too if you have an extra for sale!!

 

Why I buy 6 at a time and keep them in the desk drawer. I think they were $3 a piece at partzilla.com.

[djh3]

Go to Autozone, look on the "help" board. Look for a shock bushing, you may have to cut it down some. something like this?? http://contentinfo.autozone.com/znetcs/product-info/en/US/drm/31019/image/3/

[dave_wells]

If you have the original bolts you should replace the bolts

I got mine at sears hardware they were cheap

On my 06 By 09 I had drilled every on one of them out

 

 

Put some grease on he when you put them in

[bongobobny]

I'm pretty sure they are the same as the 1st gen hardware...