Meter Light Install Tip

[dna9656]

When you replace those #158 bulbs in the Meter (dash) with whatever put just a little silicone grease on the black inserts that hold the bulbs; the bulbs well slide in a lot easier and will pull out that way as well but still hold in place.

Also don't forget about that little ear between the wiress that service the bulb you're supposed to pull on the ear and not the wires! I used a long pair of needle nose pliers.

You can alsop put some of that grease on the 4 grommets used in mounting the meter, any squeaks will go away and it helps slow down the oxidation of the rubber.