Front forks

[eds]

How much air pressure if any should the front forks have on second generation RSV Hannigan trike?

[bongobobny]

Not much Ed, about 5 pounds each side give or take a few pounds.

[alwrmcusn]

I believe the manual says a MAXIMUM of 7 (seven) pounds. I've tried 5 psi a couple of times and honestly could not tell any difference between that and zero psi. Your results may vary however. I was also specifically warned by the dealer NOT to use the high power air systems usually found at service stations etc. He said that they could quickly pump way more air than necessary and it could blow the fork. I bought a small bicycle pump to use. I've not tried it since I had the trike kit installed, so I think I'll give it another test and see what sort of results I get with the Easy Steer of the Hannigan setup.

[eds]

Thanks guys, I was in the ballpark