Parts list for class conversion

[FEW]

Would anyone have a link to the parts I need so I can remove my compressor from my 88 VR and just have schrader valves to put air in:-) Not having much luck locating it.

 

Thanks:301:

[dna9656]

You can use the parts you have from the compressor unless you want the shraders in the stock locations. In stock locations you'll need the little ride selector mounting plate down by the fuel pump, the one for bikes with the CLASS are different than those without.,the collars that distribute the air to each fork, you can find them on ebay. 2 rings, a connecting hose and o rings. I think that's it. There is something about the plate and the air hose that goes there I can't recall right now, let me go look and I'll let you know.

PM me with questions.

[JohnT]

Bud, I just removed the lines from the class, drilled them straight through and tapped them to accepty the 1/8" threaded end of an air tank fill adapter. The other side of the banjo got a pipe plug. I put the front line under my fill lid and the back line is attached to a frame piece out of sight but in easy reach. I did use JB Kwik as "thread sealant" due to limited material depth.

Easily done, and cheap fix. Under $10 because I had the drill, tap, and JB Kwik.