YamahaRider2000 Posted May 5, 2014 #1 Posted May 5, 2014 I am looking for a speaker & amp system for my 06 Venture. I want something that I can really crank up going down the highway with good quality sound. Any suggestions???????
beltfed50 Posted May 5, 2014 #2 Posted May 5, 2014 I am looking for a speaker & amp system for my 06 Venture. I want something that I can really crank up going down the highway with good quality sound. Any suggestions??????? Me too
Wizard765 Posted May 5, 2014 #3 Posted May 5, 2014 Best speakers I know of that will fit are the Polk Audio DB401s [ame=http://www.amazon.ca/Polk-Audio-4-Inch-Coaxial-Speakers/dp/B000P0R6GQ]Polk Audio DB401 4-Inch Coaxial Speakers (Pair, Silver): Amazon.ca: Electronics@@AMEPARAM@@http://ecx.images-amazon.com/images/I/41Cgy6jdaAL.@@AMEPARAM@@41Cgy6jdaAL[/ame] Hopefully someone will come up with an AMP that is small and powerful and will hide somewhere on the bike without sacrificing useful storage space. The speakers are designed for marine use and as such they are weather resistant AND for a 4" speaker they sound pretty good. With an amp the actually sound VERY good
Chris Leedy Posted May 11, 2014 #4 Posted May 11, 2014 Bazooka make a set up that plugs right in, if you don't mind spending the money. Here's the lowest priced one I've found so far. Yes, I'm looking too, just can't hear it at highway speeds. Sorry, this one is just the amp and wire kit. [ame=http://www.amazon.com/Bazooka-MC-YAM-AMK-Yamaha-4-Channel-Amplifier/dp/B001MJ0GZC]Amazon.com: Bazooka MC-YAM-AMK Yamaha 4-Channel Amplifier Kit: Car Electronics@@AMEPARAM@@http://ecx.images-amazon.com/images/I/51c8ToZr0TL.@@AMEPARAM@@51c8ToZr0TL[/ame]
Bert2006 Posted May 11, 2014 #5 Posted May 11, 2014 (edited) Why would you not go with a good quality headset as the bike is already wired for it. That way you will get better sound quality without anoying everybody else riding around or with you. Edited May 11, 2014 by Bert2006
Mikealiasmike Posted May 11, 2014 #6 Posted May 11, 2014 Ohio don't have a helmet law so since from his state flag on profile I'm guessing he's from there. Might not wear one all the time. Not looking for debate on the why's or why nots of helmet usage, just making an observation. As for those speakers, I wonder if they make them in bullet style for a RSTD W/O fairing....
Mikealiasmike Posted May 11, 2014 #7 Posted May 11, 2014 (edited) Now these comments got me to thinking about upgrading my stereo. This set is supposed to be amplified at 900 watts. Anybody running these? http://www.ebay.com/itm/Polk-Chrome-Motorcycle-Speaker-System-Cycle-Sounds-Killer-iPhone-Galaxy-Ready-/221434643324?pt=Motorcycles_Parts_Accessories&hash=item338e88837c&vxp=mtr Edited May 11, 2014 by Mikealiasmike Made mistake in discription.
beltfed50 Posted May 12, 2014 #8 Posted May 12, 2014 Why would you not go with a good quality headset as the bike is already wired for it. That way you will get better sound quality without anoying everybody else riding around or with you. Because I tried that and HATED the lead hanging off my head. Not for me.
Eddie Posted May 12, 2014 #9 Posted May 12, 2014 I spent a lot of time and money trying to make the sound system better on my 04 , there just isn't any room for bigger speakers and thats the key, you can have a 1000w amp but with those little speakers its just a loud am radio. No bass . Now with a HD you can have some good tunes , ask me how I know haha.
Marcarl Posted May 12, 2014 #10 Posted May 12, 2014 Keep in mind that adding an amp adds draw on your power source and you need to figure out if you have enough to do it.
EasyRider Posted May 12, 2014 #11 Posted May 12, 2014 Why would you not go with a good quality headset as the bike is already wired for it. That way you will get better sound quality without anoying everybody else riding around or with you. Listen to someone's tunes then hear their pipes trying to shake the screws out of Everyone's bike!
a1bummer Posted June 20, 2014 #12 Posted June 20, 2014 These guys seem to have some good setups. http://www.motorcycletunes.com/default.asp Bill
JohnT Posted June 20, 2014 #13 Posted June 20, 2014 Go to Crutchfield and check out the Clarion amp I am using. http://www.crutchfield.com/p_020XC1410/Clarion-XC1410.html Surprisingly low impact on the electrical system of my 1st Gen. And it isn't much larger than say 2 packs of cigarettes. And very good sound quality for the size and cost. I have used both the Polk 401's and the 4" Bazookas. Either are OK as far as they can be expected to sound. It takes air movement to create sound, especially bass. The small 4" drivers do fall short a bit. But they sound good. Until and unless you over drive them without a cross over or bass blocker inline. Or tuning down the stereos bass level. So I now have a set of 20 year old Altec Lansing 5 1/2" marine speakers in the fairing where the old stereo and CLASS were. I have totally removed (and passed on to a member) the entire stock stereo and CB, as well as removing the CLASS in favor of my stereo. I have a Clarion CMS 1 head unit which is pretty good. Navigation of the stored music (thumb drive) could really be easier, but other than that I am quite happy with it. I see that now it is hard to find and has been replaced with the CMS 2.
Marcarl Posted June 20, 2014 #14 Posted June 20, 2014 Buy a Spyder,,,,, problem solved!!! ooppps this is a Venture site,,, sorry about that!
Stache Posted June 20, 2014 #15 Posted June 20, 2014 Buy a Spyder,,,,, problem solved!!! ooppps this is a Venture site,,, sorry about that! Quit trying to draw us into your web.....
JohnT Posted June 20, 2014 #16 Posted June 20, 2014 Buy a Spyder,,,,, problem solved!!! ooppps this is a Venture site,,, sorry about that! The "Dark Side" is starting to take on a whole new meaning.
Black wing Posted June 26, 2014 #17 Posted June 26, 2014 these speakers http://www.kicker.com/PS_Coaxials with this amp http://www.clarion.com/ca/en/products-personal/speaker/XC1410/index.html this is what i run and it'll drown out anything
speakerfritz Posted June 27, 2014 #18 Posted June 27, 2014 couple of factors to consider a. can your electrical system provide the additional power for the higher power amp? b. try to find high power speakers that have high SPL. a speaker with 90db spl powered by a 10watt amp will sound just as loud as a speaker with 80db spl powered by an 80watt amp at the same volume level. Folks incorrectly shop for watts, they should be shoping for speaker spl or the speaker sensitivity rating.
Black wing Posted June 28, 2014 #19 Posted June 28, 2014 well that is the set up in my bike and works amazing, just because is says 300w dosent means its always drawing it, the amp will draw what it needs and even though it is much less than what a dual speaker system requires it is as small as you can get as a waterproof set up though on the power end you do need to run a thicker gauge wire to the accessory panel for the deck cause the factory wiring will not take it
Rosie1965 Posted July 25, 2014 #20 Posted July 25, 2014 though on the power end you do need to run a thicker gauge wire to the accessory panel for the deck cause the factory wiring will not take it Are you running any kind of a noise filter with your setup?
Rosie1965 Posted August 6, 2014 #21 Posted August 6, 2014 I ended up going with the amp Black wing linked to and the Kicker speakers. I went with the 2 ohm since the amp is ok with them. Also went with the JBL PRV 175 . Raining right now so can't do a road test, but holy cow does it rock the garage! Also love being able to bluetooth from my phone. http://i1176.photobucket.com/albums/x337/steve_roseman/Venture/0806141132a.jpg
jimmyenglish Posted August 17, 2014 #22 Posted August 17, 2014 Hey Rosie, I too am going to get the prv175. Is the built in amp not sufficient enough? I read that it gets very hot. Any heat issues? That's a good looking setup you have!
Rosie1965 Posted August 18, 2014 #23 Posted August 18, 2014 I never tried the PRV without the Clarion amp. I know to hear things well going down the highway you really need to be able to push the speakers. I know there are no heat issues with the PRV when it's feeding the amp. Also no heat issues with the amp. I went with the high side on the amp inputs. I wanted to use the pre-outs from the PRV bit it's only two channel and I may add some rear speakers eventually.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now