passanger highway pegs?

[big_mike]

is anyone making passanger highway pegs for a second gen if so any feedback on brand thinking about puting a set on the bike:322:

[brainfart]

I believe Diamond R does or did make a set.

saw them on a RSV one time, never used 'em.

[M.Squires]

I have put a set of the Kury large ISO pegs on mine also used the offsets to get them in the right place for my stubby legs:rotf:

[pegscraper]

There have been posts here too, one very recently, of a couple folks who have made their own brackets that mount underneath the rear floorboard mounting brackets that will hold another set of footpegs farther down. You might look through the 2nd gen technical sections and find them.

[Freebird]

I've got the Diamond R passenger pegs on mine. I did change out the actual pegs with some KuryAkyn's that I had. They work pretty good.

[Rick Butler]

Mike,

 

Until this post, I had forgotten that I have an original set of the DiamondR passenger highway pegs, laying in a drawer. Linda didn't use them that much, so I took them off. In fact, now that I think back I'm the one that talked Allen into making them after see one of the guys on Venturenet make a crude set out of aluminum.

 

If you want to see what they look like Allen still has them in his product list:

 

http://www.diamondraccessories.com/yamaha/proddisplaymultipic.php?name=Passenger%20Highway%20Pegs

 

If you want my mine, I'm sure they can be for sale,

 

Rick

[Jerry W]

If you are wanting to use pets instead of passenger floorboards, you can use the mounting brackets from an origional Royal Star ('96 - '01) and order a set of pegs to fit that bike. The bolt holes have not changed. There are several pegs out there that will fit that bike.

[Guest Saddletramp]

Rick, you have mail