Flasher Mod follow-up

[MikeWa]

I completed the modification to my signal flasher and It works perfectly.

I cut the wire loop and inserted the 2 watt 0.33ohm resistor as instructed. The flasher now flashes correctly with the led bulbs. Pretty easy to do.

Mike

 

[ATTACH]82307[/ATTACH] [ATTACH]82306[/ATTACH]

[bongobobny]

Cool beans Mike!! I have to do the same mod myself...

[Gray Ghost]

I did the mod, but your finished product came out cleaner than mine. Good job.

[dacheedah]

What kind of blinker fluid did you put back in her? Synthetic or dino?

[Flyinfool]

What kind of blinker fluid did you put back in her? Synthetic or dino?

 

Since you are doing this to convert to modern LEDs, it is obvious that you must also have modern synthetic blinker fluid. DUH!!!!!:doh:

[dacheedah]

Since you are doing this to convert to modern LEDs, it is obvious that you must also have modern synthetic blinker fluid. DUH!!!!!:doh:

 

Sorry Jeff, what wazzzz I thinkin

[M61A1MECH]

Don't forgewt that LEDs are polarity sensitive, so make sure you got the forward biased DC compatible blinker fluid, the AC stuff won't work.

[MikeWa]

I used the Asian blinker fluid that came with the LEDs. You just have to remember to poor it in from the bottom.

 

Mike

[dacheedah]

Don't forgewt that LEDs are polarity sensitive, so make sure you got the forward biased DC compatible blinker fluid, the AC stuff won't work.

 

All I can find is Blinker + in the blue container and Blinker - in the red container

[videoarizona]

LOL!

 

I know this is an older thread...but the responses are so good.....grins.