Re-assembly of the rear suspension

[dna9656]

I dis-assembled the swing arm, to install zirc fittings but that didn’t pan out

Apparently I have some missing parts; these parts WERE NOT THERE during dis-assembly.

When re-assembling the Arm, Relay SILVER P/N [26-H2217-A0-13 AND the Arm 1 P/N 26H-2217M-00-00 (these form the knuckle that connects the frame, shock, and swing arm together) I noticed I was short some parts. I have the parts pictured and the nuts, bolts and washers to connect the large arm to the swing arm.

http://i280.photobucket.com/albums/kk195/dna9656/IMG_0197.jpg

 

So in the picture I have 2 covers, thrust with large holes and 4 covers, thrust with small holes.

The large ones go on the a large bolt like holding the shock or the arm to the frame.

 

These look like they might be the “Cover,Thrust” they look like dust covers to me.

Are they what is referred to as Cover,Thrust?

What IS a “Cover, Plate”? A thick washer? I’m missing a LOT of these, and when the “Cover, Thrust” is in place on bolt “34” there isn’t enough bolt left to even think about starting the Nut, Self Locking (Item 36).

Does anyone have a PHOTOGRAPH of this assembly so I can confirm what the situation is?

Can someone show me a picture of a Washer, plate, a cover, thrust and a cover, dust is?

Edited February 10, 2014 by dna9656

[bongobobny]

Carl, did you let the cat play with the keyboard again?????

[Marcarl]

Carl, did you let the cat play with the keyboard again?????

Tried to post a picture,,, almost crashed the site,,, opps! Man that file was big,,,, and only goobilee goop.

[Marcarl]

Go to Yamaha Sports parts catalog to see if that will help you out.

On line at Yamaha Sports Plaza,,, or Yamaha Parts or pretty well any Yamaha dealers website.

Let us know how that works out for you.

[dna9656]

Go to Yamaha Sports parts catalog to see if that will help you out.

On line at Yamaha Sports Plaza,,, or Yamaha Parts or pretty well any Yamaha dealers website.

Let us know how that works out for you.

 

I went to yamahapartshouse.com and compared the 84 to the 83; this is what I found:

 

The bike has a has a late in the model year date of MFT; it's 10/83.

According to the catalog I checked (with the exceptions noted below) The are the same. I'm thinking the difference is grease fittings were added.

Part numbers from 83 are below the 84 M/Y.

 

Item 15. Arm,

Relay

SILVER [26-H2217-A0-13 N/A

41R-2217A-00-35 N/A Changed

 

 

 

Item 22. Bush 90386-18115-00 $6.57 4 ea. Changed

90381-18053-00

 

All the part Numbers are the same. I used the parts catalog located at YamahaPartshouse.com

 

Thanks. Hope I can get a picture soon!

[icebrrg3rd]

Here's a pic when I did the grease fittings on my swing arm ('83). They are laid out in the approx position they go on. Hope this helps a little.

 

-Andrew

Edited February 10, 2014 by icebrrg3rd

[bongobobny]

Here's some more pix from my '84 rear rebuild, lucky you it's setting on the bench. Last pix is an old one that's laying around...

[dna9656]

Here's a pic when I did the grease fittings on my swing arm ('83). They are laid out in the approx position they go on. Hope this helps a little.

 

-Andrew

When I click on your picture I get a window that says I have to sign in; even though I am already signed it. I can't get around this sign in window regardless of how many times I sign in. I have talked to the admin about it and they say it's my problem, a issue with my bowser. I have no idea how to fix it. Could you please SEND me your pic in a PM?

[bongobobny]

When I click on your picture I get a window that says I have to sign in; even though I am already signed it. I can't get around this sign in window regardless of how many times I sign in. I have talked to the admin about it and they say it's my problem, a issue with my bowser. I have no idea how to fix it. Could you please SEND me your pic in a PM?

Try logging out then close your browser. Then reopen your browser and log in again...

[camos]

When I click on your picture I get a window that says I have to sign in; even though I am already signed it. I can't get around this sign in window regardless of how many times I sign in. I have talked to the admin about it and they say it's my problem, a issue with my bowser. I have no idea how to fix it. Could you please SEND me your pic in a PM?

Have you tried logging out of the site then clear the browser cache? Do have the browser set to remember your login automatically?

[Trader]

I don't think you CAN attach a picture to a pm can you?