rutman Posted February 2, 2014 #1 Posted February 2, 2014 Weather was decent yesterday so went to building to check on bike. Saw coolant on floor. Not alot but still freaked me out. Did research here and determined it must be freeze plugs. Will it hurt to ride it till I get them replaced. Supposed to be 60' today.
Sylvester Posted February 2, 2014 #2 Posted February 2, 2014 Easy quick fix is take the side covers off and insert (tape of glue) a dime over them and re-install covers.
rutman Posted February 2, 2014 Author #3 Posted February 2, 2014 Easy quick fix is take the side covers off and insert (tape of glue) a dime over them and re-install covers. thanks for the tip. that's awesome. just went to the building, removed the fins, and all 4 plugs were leaking. glued dimes to the covers and reinstalled. this temp fix till I can get new plugs and change coolant only cost me 4 thin dimes. you guys rock!!!
Yammer Dan Posted February 2, 2014 #4 Posted February 2, 2014 thanks for the tip. that's awesome. just went to the building, removed the fins, and all 4 plugs were leaking. glued dimes to the covers and reinstalled. this temp fix till I can get new plugs and change coolant only cost me 4 thin dimes. you guys rock!!! You get the dimes back when you fix it......
rutman Posted February 2, 2014 Author #5 Posted February 2, 2014 You get the dimes back when you fix it...... hey I might just send them to Sylvester for posting the tip. lol.
Yammer Dan Posted February 2, 2014 #6 Posted February 2, 2014 hey I might just send them to Sylvester for posting the tip. lol. :rotfl:
eusa1 Posted February 2, 2014 #7 Posted February 2, 2014 You should install a set of my diamond cut fins while you have them off!
rutman Posted February 2, 2014 Author #8 Posted February 2, 2014 You should install a set of my diamond cut fins while you have them off! yea they would look good. if you would give me a set, I could be a rolling billboard for you.
Sylvester Posted February 2, 2014 #9 Posted February 2, 2014 You should install a set of my diamond cut fins while you have them off! I have them and they are ... glitter.
eusa1 Posted February 2, 2014 #10 Posted February 2, 2014 yea they would look good. if you would give me a set, I could be a rolling billboard for you. I have plenty of billboards out there, but thanks for the offer! Enjoy the ride!!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now