Left Rear signal housing.

[gibvel]

Just noticed yesterday that my left rear turn signal housing has pretty much broken from front to back. I believe it was due to the visors that the PO put on the bike.

 

Has anyone got one of these? Don't know if this is an extra part after a trike conversion but just thought someone who has done a conversion might have one lying around he's not using.

 

Looked at Pinwall on ebay and they don't seem to have one.

 

If you have any links to an ebay auction post that too.

 

Thanks

[Bubber]

Picture would help. You have two bikes listed and I for one am not sure if they would be the same. Good luck with the search.

[gibvel]

Sorry! Forgot I have the other listed.

 

It's for the Royal Star Venture and I don't believe they are the same.

 

I did find one on Ebay but they want $35 + $8.50 shipping. Most of the places I've looked for new ones are $44.50 or so. The only good thing about this part is that it's in Denver and I could possibly go and get it and save on shipping.

[Bubber]

Now I may actually have one. what color are the wires.

If just the housing is bad you can just swap the guts to a different housing. I think I may have a complete house.

Still I would like to see a picture to be sure.

 

Bubber

[gibvel]

basically this is the unit, Bubber.

 

http://www.ebay.com/itm/99-YAMAHA-XVZ1300-XVZ13-VENTURE-ROYAL-STAR-TURN-SIGNAL-REAR-LEFT-17-/370634680455?pt=Motorcycles_Parts_Accessories&hash=item564b8c6887&vxp=mtr

[Bubber]

I probably have the housing from the bolt out to the lens, but do not have the bracket portion to the bike.

Do you need the whole thing or what I have described?

I will look if still interested.

It sure looks like what I have.

[gibvel]

So, basically, you've got the section that screws (crimps) onto the bracket? Do the wires thread through the bracket pretty easily? Is it in good shape?

 

How much do you want for it?

[Bubber]

Yes I have one complete with black and blue wires too.

Send me a PM if still interested.

 

Bubber

 

PS I compared these to my venture and they look the same even though they probably came off a 1100 classic.

There are markings on the inside of each of the housings I have so give me the P/N, Code and I will compare to make sure they are the same.

Edited October 18, 2013 by Bubber
added PS

[gibvel]

Well, the part number I got off of yamaha sports plaza was:

 

For the 99 Venture and the 99 Boulevard they are the exact same number, since they hook up to different brackets it is only the part that crimps onto the bracket.

 

The number for the left is 42X-83330-K1-00

The number for the right is 42X-83340-K1-00

 

I honestly don't know what the difference would be though. It uses a bolt and a nut so it can't be that one side is threaded and the other not which would cause the bolt to be on the top instead of the bottom. I'd still rather have the correct side though.

 

Now I just looked at the bracket part for the venture on the parts website. That thing goes for $108 . Hmmm if I could get that rig on ebay for a little over $40 that may be worth it. Gotta decide if that would come in handy down the line. Probably not.

 

Let me know what the number is.

 

P.S. Would that be a 99 V-Star 1100 (they don't list the 1100 as a classic)? That is the exact same number as well. Sorry, don't know where I got Boulevard from unless you changed it after I looked. And shared by the V-Star 650 Classic. So the chances are good that it's one of those numbers.

Edited October 18, 2013 by gibvel

[Bubber]

I may have miss led you a little here.

Cast on the inside of the housing is the following numbers.

YHA317

STANLEY

0802 Japan

These have come from multiple years of V-Star 1100 but they all seem to have the same designation.

Shot me a PM and I will send you my phone number or email which ever you prefer.

PS these use a bolt with a nut, it does not screw in from one side to the other.

I also do not have the hardware to send.

Bubber