Ventureless Posted September 27, 2013 #1 Posted September 27, 2013 I had asked this question on another thread and another member suggested that I should start a new one with my question since it didn't seem to get an answer. So here it goes. I have been chasing some odd feelings with the bike. Feels like the front end, but could be the rear transmitting through the front. But the other day when I was checking the air in the tires, I noticed something funny. I remove the rim and have the dealer mount and balance the tires and then I reinstall the rim. Well it looks like the dealer mounted the tire backwards on the rim. If you look at the pic, you can see the 2 directional arrows (one on the tire and one on the rim). They are going in different directions. The tire arrow is going in the correct direction which means the rim is going backwards according to the directional arrow on it. Does this make a difference or can the rim go either direction? Or do I need to go back to the dealer and have them remove and remount the tire?
Sylvester Posted September 27, 2013 #2 Posted September 27, 2013 I don't see where the direction of the wheel makes any difference in the handling of the bike. But I didn't sleep in a Holiday Inn last night.
Ventureless Posted September 27, 2013 Author #3 Posted September 27, 2013 I don't see where the direction of the wheel makes any difference in the handling of the bike. But I didn't sleep in a Holiday Inn last night. I wouldn't think so either, but there must be a reason they have directional arrows on the rim as well.
Rick Haywood Posted September 27, 2013 #4 Posted September 27, 2013 Take it back and have them put the tire on the wheel the proper way. If the rotation of the wheel didn't matter it wouldn't be marked. Plus if it solves the problem then it will tell us for sure if it matters:confused24:
bongobobny Posted September 27, 2013 #5 Posted September 27, 2013 The issue with the rim may be due to the rotors and how the holes ventilate the brake gasses. I know it makes a difference with slotted rotors, and the cross drilling looks like it is in sort of a slotted pattern...
star4772 Posted September 27, 2013 #6 Posted September 27, 2013 I had asked this question on another thread and another member suggested that I should start a new one with my question since it didn't seem to get an answer. So here it goes. I have been chasing some odd feelings with the bike. Feels like the front end, but could be the rear transmitting through the front. But the other day when I was checking the air in the tires, I noticed something funny. I remove the rim and have the dealer mount and balance the tires and then I reinstall the rim. Well it looks like the dealer mounted the tire backwards on the rim. If you look at the pic, you can see the 2 directional arrows (one on the tire and one on the rim). They are going in different directions. The tire arrow is going in the correct direction which means the rim is going backwards according to the directional arrow on it. Does this make a difference or can the rim go either direction? Or do I need to go back to the dealer and have them remove and remount the tire? There would be no need for directional arrows if it didn't matter which way they went. Take back to the dealer and have them mount it the proper way. Arrows are there for a reason weather it makes a difference in your problem or not. Have this done before you put any miles on the tire. Joe
ragtop69gs Posted September 27, 2013 #7 Posted September 27, 2013 I had asked this question on another thread and another member suggested that I should start a new one with my question since it didn't seem to get an answer. So here it goes. I have been chasing some odd feelings with the bike. Feels like the front end, but could be the rear transmitting through the front. But the other day when I was checking the air in the tires, I noticed something funny. I remove the rim and have the dealer mount and balance the tires and then I reinstall the rim. Well it looks like the dealer mounted the tire backwards on the rim. If you look at the pic, you can see the 2 directional arrows (one on the tire and one on the rim). They are going in different directions. The tire arrow is going in the correct direction which means the rim is going backwards according to the directional arrow on it. Does this make a difference or can the rim go either direction? Or do I need to go back to the dealer and have them remove and remount the tire? HMMM.... I never noticed the arrow on the rim, now I gotta go look.
Ventureless Posted September 27, 2013 Author #9 Posted September 27, 2013 There would be no need for directional arrows if it didn't matter which way they went. Take back to the dealer and have them mount it the proper way. Arrows are there for a reason weather it makes a difference in your problem or not. Have this done before you put any miles on the tire. Joe To late. The tire has 1000 miles or so already. My plan is to call the dealer and be up there first thing in the morning tomorrow.
playboy Posted September 27, 2013 #10 Posted September 27, 2013 I told you you needed to start a new thread Glad I wasn't the only one who hadn't noticed the directional arrow on the wheel. I wonder if the rear wheel has a arrow also:stirthepot:
ragtop69gs Posted September 27, 2013 #11 Posted September 27, 2013 I told you you needed to start a new thread Glad I wasn't the only one who hadn't noticed the directional arrow on the wheel. I wonder if the rear wheel has a arrow also:stirthepot: You can only put the rear wheel on upside down, not backwards !
playboy Posted September 27, 2013 #12 Posted September 27, 2013 You can only put the rear wheel on upside down, not backwards ! I always put my bicycle wheels on upside down never tried that on my motorcycle. What kind of inverter do you use.
Leland Posted September 27, 2013 #13 Posted September 27, 2013 I too take the wheels into the dealer to mount new tires. Two out of three times they have mounted the front tire backwards according to the arrows. The first time, I had the wheel re-mounted to the bike before I noticed it and had to return to the dealer. The second time I checked before I left the dealer and made him change it immediately. Mounting tires is the only service that I allow the dealer to perform and they have screwed that up more times than not.
Sylvester Posted September 27, 2013 #14 Posted September 27, 2013 OK, I am wrong. Should have stayed at a Holiday Inn many years ago. I happened to install my last front tire correctly, but I didn't know anything about wheel direction. I have changed 13 to 14 sets on my 02 RSMV over the last 180,*** miles. All done by me personally. Go figure. Never had an issue with the front wheel/tire other than a separated tread on a Metzler ME880.
ragtop69gs Posted September 27, 2013 #15 Posted September 27, 2013 I always put my bicycle wheels on upside down never tried that on my motorcycle. What kind of inverter do you use. The only time my bicycle wheels were upside down is when I thought I was Evil Knevil and tried jumping off a loading dock Don't know what I was thinking I'm sorry but the inverter type is proprietary info and cannot be disclosed in an open forum.
Ventureless Posted September 30, 2013 Author #16 Posted September 30, 2013 I guess as of right now I would say make sure you mount your tires in the same direction as the rim. The dealer remounted mine and I reinstalled it and went for a short ride. Seems that the rim direction did matter in my case. Seems to ride well again. I will tell better with my round trip commute to work tomorrow. If I find differently and that it didn't help, I will post again.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now