ragamuffin Posted February 21, 2008 #1 Posted February 21, 2008 I posted a few minutes ago but ended up with a 2nd gen question on the 1st gen forum. I put in a stebel horn, and when finished noticed that I have no turn signals or flashers to the rear, everything is fine in the front- any ideas? I do have rear brake lights - thanks for any and all help tj
Freebird Posted February 21, 2008 #2 Posted February 21, 2008 Probably best to just work your way back. There is a connector under the seat on the left side that goes to the rear for all the lights. I would start there. Unplug it and use a meter to confirm that have power at that point. Then at the rear, you will find plug in connectors behind the license plate. That would be the next place to check. See if you have power there.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now