Enrichment Valve Question

[Dizzle223]

So I just had my carbs done at a local shop. Got them back on the bike and noticed the choke lever didn't feel right. Upon closer inspection I saw 2 of the choke valves (enrichment valves) would not move and the other 2 were sticky.

 

I loosened the linkage on the 2 that were not moving and was able to get the bike running but they are still stuck.

 

Was wondering if anyone else has had this problem and what can I do to free these sticking valves.

 

I've posted a picture of the part if that helps....

 

Thanks!

 

Brian

[Peder_y2k]

You'll need to examine the brass plunger end, plus the linkage, and, the cable connection for binding. It's possible something was forced and bent, or misaligned. Try a shot of WD40 on the plunger as well.

-Pete, in Tacoma Wa USA

[greg_in_london]

Be careful when you wiggle it - the bent metal lifter arms are not that strong and it is possible to break the end of the plunger where the groove for the lifter is :-(

[Dizzle223]

Thanks guys... I ended up pulling the carbs and removing each valve. With a little TLC they are working as they should.

 

Happy riding!

 

Brian