Hey Randya.....dumb Question!!!!!!

[dwichert]

I am doing tranny repair as you have done.I have copied all the foroms that you,fixit3546 and freebird have wrote......My dumb question is the crankcase? Is there a gasket their or do i need to you'se gasket sealer?????I have done the gears and ready to put back together. By the way the foroms had great info!!!!!!!!!!Thanks Denny

[Squeeze]

Hi Denny,

i'm not Randy but to answer your Question, the upper and lower half of the Casing are sealed with Gasket Fluid or Silicon, which Yamaha suggests.

[fixit3546]

Yamabond or equivelant.

 

in a very light coat.

 

I used one of those triangle shaped pencil erasers to apply it. it worked well.

[dwichert]

what is equivelant to yamabound? is it high temp? Denny

[Rocket]

what is equivelant to yamabound? is it high temp? Denny

 

ThreeBond 1104, see this link for more info http://www.threebond.com/aftermarket.htm

[fixit3546]

ThreeBond 1104, see this link for more info http://www.threebond.com/aftermarket.htm

 

 

That's the one, I had to get homw to read the tube.

 

Thanks Rocket....

[dwichert]

Thanks for all the help!!!!!!!!!!!!!!!!!!!!!!!!!DENNY

[Venturous Randy]

Thanks guys for helping him out. Yep, Yamabond or the Threebond 1104 is what you want and also as noted, a thin coat will do.

What did you end up doing on your transmission and fixit, how is yours doing?

RandyA

[Dano]

Hey Randy & Fixit, I read ya'lls post from last year on the fix, you were gonna go in cahoots on the gear fix as far as rebuilding. Had any takers? I can tear it down and put'er back together, but not able to do the gear cut. Would be willing to contribute to your bike fund if you're willing to do it for me! Would also save me some much needed funds for other repairs! Gonna try to do the vboost addition, as Buddy is selling me the one he got from toolman. Every dollar counts!

 

Let me know,

 

Dan

[dwichert]

I followed you're forum.................Getting ready to put it back together

Denny:grandma: