dwichert Posted February 19, 2008 Share #1 Posted February 19, 2008 I am doing tranny repair as you have done.I have copied all the foroms that you,fixit3546 and freebird have wrote......My dumb question is the crankcase? Is there a gasket their or do i need to you'se gasket sealer?????I have done the gears and ready to put back together. By the way the foroms had great info!!!!!!!!!!Thanks Denny Link to comment Share on other sites More sharing options...
Squeeze Posted February 19, 2008 Share #2 Posted February 19, 2008 Hi Denny, i'm not Randy but to answer your Question, the upper and lower half of the Casing are sealed with Gasket Fluid or Silicon, which Yamaha suggests. Link to comment Share on other sites More sharing options...
fixit3546 Posted February 19, 2008 Share #3 Posted February 19, 2008 Yamabond or equivelant. in a very light coat. I used one of those triangle shaped pencil erasers to apply it. it worked well. Link to comment Share on other sites More sharing options...
dwichert Posted February 20, 2008 Author Share #4 Posted February 20, 2008 what is equivelant to yamabound? is it high temp? Denny Link to comment Share on other sites More sharing options...
Rocket Posted February 20, 2008 Share #5 Posted February 20, 2008 what is equivelant to yamabound? is it high temp? Denny ThreeBond 1104, see this link for more info http://www.threebond.com/aftermarket.htm Link to comment Share on other sites More sharing options...
fixit3546 Posted February 20, 2008 Share #6 Posted February 20, 2008 ThreeBond 1104, see this link for more info http://www.threebond.com/aftermarket.htm That's the one, I had to get homw to read the tube. Thanks Rocket.... Link to comment Share on other sites More sharing options...
dwichert Posted February 20, 2008 Author Share #7 Posted February 20, 2008 Thanks for all the help!!!!!!!!!!!!!!!!!!!!!!!!!DENNY Link to comment Share on other sites More sharing options...
Venturous Randy Posted February 20, 2008 Share #8 Posted February 20, 2008 Thanks guys for helping him out. Yep, Yamabond or the Threebond 1104 is what you want and also as noted, a thin coat will do. What did you end up doing on your transmission and fixit, how is yours doing? RandyA Link to comment Share on other sites More sharing options...
Dano Posted February 20, 2008 Share #9 Posted February 20, 2008 Hey Randy & Fixit, I read ya'lls post from last year on the fix, you were gonna go in cahoots on the gear fix as far as rebuilding. Had any takers? I can tear it down and put'er back together, but not able to do the gear cut. Would be willing to contribute to your bike fund if you're willing to do it for me! Would also save me some much needed funds for other repairs! Gonna try to do the vboost addition, as Buddy is selling me the one he got from toolman. Every dollar counts! Let me know, Dan Link to comment Share on other sites More sharing options...
dwichert Posted February 23, 2008 Author Share #10 Posted February 23, 2008 I followed you're forum.................Getting ready to put it back together Denny:grandma: Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now