Streering bearing access 90 vr

[Kevhed]

Chasing an instability problem and am trying to get to the bearings. I believe they are too tight as the bars will not move to the stop without assistance.

 

It appears someone has tried to loosen them with a flat blade. I can see the marks. There is no washer between the nuts.

 

My question is I have the bars off and have removed the big nut over the part that covers the bearing nuts. I loosened the 2 bolts around the top of the forks (by the A

Hex head top caps) but am not sure what actually needs to be done to get that part off so I can get at the bearing nuts.

 

Any help would be appreciate. I am waiting for a manual.

 

Thanks

[Yammer Dan]

Flat blade method works. Just takes a little playing.