casiper Posted July 10, 2013 Author #53 Posted July 10, 2013 I just connected the stator plugs and started the bike. (previously I was getting 22v at idle and 47v at 2800 rpm) With both connectors engaged I went from 8.3v to 9.7 regardless of the rpm. What do you think?
casiper Posted July 10, 2013 Author #54 Posted July 10, 2013 I've taken the R/R out and used the video in the link below and according to that the R/R should be ok. [ame=http://www.youtube.com/watch?v=kDx3zgOLShY]Rick's Motorsport Electrics, Inc. How to test a motorcycle rectifier regulator - YouTube[/ame] any input?
casiper Posted July 12, 2013 Author #55 Posted July 12, 2013 Would I be right to think that the stator is acting up after riding for a while. I got good acv readings before going for a test drive of 30 miles. Towards the end I started to get 12.4 to 13v (I installed a digital volt reader at the battery terminals). after the bike cooled down for 10 minutes I had it run for a few and I had 13.9v at idle.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now