could use some help

[REDRIDER52]

I was under trike greasing cv joint and saw 2 zerk fittings on swing arm BUT I could not get grease gun hose on it its turned towards the front of the fender any ideas on howto get on it to grease the swing arm.

 

will try to post picture taken with cell phone

[CaptainJoe]

just put a open end wrench and move the grease zerk... sorry i see now its a straight one...oooops!

 

buy an angled grease zerk. The come in different angles including 90 and 45 deg..

[Carbon_One]

I took off the straight zerk fitting and replaced them with a 90* one. Turned them so they pointed down and now can grease them easily.

Larry

[REDRIDER52]

do you know what size they were standard or metric

[ragtop69gs]

I took off the straight zerk fitting and replaced them with a 90* one. Turned them so they pointed down and now can grease them easily.

Larry

 

[bongobobny]

The ones on the swing arm should be the stock metric...

[ragtop69gs]

The ones on the swing arm should be the stock metric...

 

They make metric Zerk fittings ?

[bongobobny]

Uhhh, yes they do!

[Trader]

Contrary to popular opinion...there is more to the world than the USA .....

and MOST of the world uses metric!!!!!!

 

 

(get the popcorn ready!)

[Big Lou]

I heard a song once ,"",we are the world""

 

be all you can be

[dacheedah]

Contrary to popular opinion...there is more to the world than the USA .....

and MOST of the world uses metric!!!!!!

 

 

(get the popcorn ready!)

 

Apparently most of the rest of the world makes the stuff I use, most seems metric to me

[ragtop69gs]

Apparently most of the rest of the world makes the stuff I use, most seems metric to me

 

A backwards bunch they are