Boe Posted February 12, 2008 #1 Posted February 12, 2008 Lowering 3" and forward 3" for tall passenger. I cut off the hinge of the yamaha mount and welded 1/4" plate horizontally to add length to clear side pipes. then welded plate at 90deg vertically to drop 3" down and forward. I took the passenger floorboard mount from a HD and cut and welded the floorboard hinge point to the bottom of the vertical plate. I used to HD mount so I can use what ever after market floorboard I choose. I am going to use Kuryakyn. After a dry fit for clearance I will finish the welds and remove the excess mass of the plate by cutting to a more attractive profile. Final step will be to have the piece chromed and mounted. Will add pics after next step.
Eck Posted February 12, 2008 #2 Posted February 12, 2008 Looks like a very neat idea you have there. A little dressup sanding, add a little paint and it will look almost like OME. A very cool idea !!!!!!!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now