finding it tight under the battery cover

[Black wing]

so im trying to get the electrical up to date on my VR and have the fuse box from buckeye http://www.buckeyeperformance.com/p22.htm and i picked up a new accessory rail and i just dont seem to have the room others do under the top of the foux tank. when ever i try to put the cover back on the cover hits the fuse box and stops almost a half an inch from the hook. is my battery bigger than stock? if any one knows the height of a stock battery it would be appreciated

[Marcarl]

so im trying to get the electrical up to date on my VR and have the fuse box from buckeye http://www.buckeyeperformance.com/p22.htm and i picked up a new accessory rail and i just dont seem to have the room others do under the top of the foux tank. when ever i try to put the cover back on the cover hits the fuse box and stops almost a half an inch from the hook. is my battery bigger than stock? if any one knows the height of a stock battery it would be appreciated

Stock is 6.5".

Doesn't leave a lot of extra room.

[Snaggletooth]

When I did the '84 I had to re-work the wires around a bit then set it back on top of the air box. Still tight but it fits.

[mralex714]

From your link.

 

(NOTE: The Fuse block will have to be relocated to the top of the air filter housing due to increases height of block.)

PART # BP426-046-081 Retail $ 29.95 Your Cost $22.00

[Flyinfool]

From your link.

 

(NOTE: The Fuse block will have to be relocated to the top of the air filter housing due to increases height of block.)

PART # BP426-046-081 Retail $ 29.95 Your Cost $22.00

 

Must be a tall fuse block.

The kit from skydoc fits in the stock location.

[Goose68]

I just got my kit from Skydoc. Planning on putting it in this week.