Brake Pad Posted April 26, 2013 #1 Posted April 26, 2013 I just picked up a Dunlop elite 3 rear tire, for the RSV what tire pressure should I be running?
deepforkriver Posted April 26, 2013 #2 Posted April 26, 2013 Run what the tire manufacturer recommends. I have read TONS of post with opinions on this and keep coming back to manufacturer recommendation. I am very certain others will chime in any time, with two up riding, one up riding, with trailer, without trailer, etc. But for cupping, warranty, tread wear, etc. I keep hearing to run what they recommend. Just my Ride Safe, James
Brake Pad Posted April 26, 2013 Author #3 Posted April 26, 2013 (edited) I can't find it on the tire Is 40 the right pressure for the E 3's? Edited April 26, 2013 by Brake Pad
deepforkriver Posted April 26, 2013 #4 Posted April 26, 2013 From another website discussion on the same subject using 800 lb bike only weight (goldwing): "Dunlop states on its site that rear Elite 3 should be inflated to 36 psi for solo riding and light to medium loads on any touring bike and to 40 psi for two up and heavy loads, no mentioning of front tire in either case other then reference to owners manual." Take that for what it's worth. I dont know of the trustworthiness of this data. I know there are tire pressures listed on the bike. I do not run Elite 3's therefore will not give my recommendation. But someone on here does? James
MidlifeVenture Posted April 26, 2013 #5 Posted April 26, 2013 http://www.venturerider.org/forum/showthread.php?t=60701
wes0778 Posted April 26, 2013 #6 Posted April 26, 2013 Right or wrong, I ran 40 psi (max pressure listed on the sidewall) all the time.
crowrod Posted April 26, 2013 #7 Posted April 26, 2013 just put new e3s on 3 weeks ago ties say 40 lbs cold :301:front and rear
bongobobny Posted April 26, 2013 #8 Posted April 26, 2013 just put new e3s on 3 weeks ago ties say 40 lbs cold :301:front and rearIt's never cold in south Florida...
Brake Pad Posted April 26, 2013 Author #9 Posted April 26, 2013 the Garage is A/C'd & has Carpet:draming:
Yammer Dan Posted April 26, 2013 #10 Posted April 26, 2013 the Garage is A/C'd & has Carpet:draming: Where do you work on things??
sanderjack Posted April 26, 2013 #11 Posted April 26, 2013 that is one of those 4 letter words that is forbidden in my house. Now ride, cruise, road trip are all good four letter words.
Brake Pad Posted April 26, 2013 Author #12 Posted April 26, 2013 I guess my NEW Bike repair guy is a real grease monkey, I had to pull the saddle bags off to clean the rim, (DAMN !!!!), also added the 6 pounds that was missing back there, and the 2 pounds on the front tire... (What's up with that ??) I also changed the rear end oil with some nasty smiling 90 weight.
Seaking Posted April 26, 2013 #13 Posted April 26, 2013 Consider the fact that the manual recommends 38 psi rear and 36 psi front for a "typical" rider of 160 lbs. Dunno about you, but some people aren't that light at this stage of life For some, we might be riding like a person and a half up.. I typically ride my E3's with 40 in the rear and 38 in the front.. for me, this gives me the best handling and longevity for the life of the tire.
Brake Pad Posted April 27, 2013 Author #14 Posted April 27, 2013 I push 260, & the Lil wife is ( well ) maybe 115-ish, Then there is the 350 Lb loaded trailer
ablumny Posted April 27, 2013 #15 Posted April 27, 2013 I can factually say what not to do with a Dunlop E3 (or any )new rear tire...... ..... Don't be lazy like me, not constantly checking and run it under inflated. I destroyed a perfectly good E3 in under 3000 miles by doing so! Bad cupping cause by under inflation. It's such a pain to get under there though....I'm investing in a tire pressure monitor. 40# for me all the time now...
djh3 Posted April 27, 2013 #16 Posted April 27, 2013 I ran 40/40 in mine when it was on. It worked with that tire so thats what I'm running with the Michelin Commander 2's also. The pressures on the bike are kind of like the pressures listed on the door sill or your car. Its for the OEM tires which may or may not have been the E-3 and are usually lower than what will give you the best milage and performance. The pressures are "OEM recomended" to get the best (softest) ride feel typicaly.
Miles Posted April 27, 2013 #17 Posted April 27, 2013 Mike, run 40/40 when measured cold. If you are hauling the trailer, run 42 on the back tire. Do not raise the tire pressure on the back with just your wife added, as most of us have luggage that weighs more than your wife. 115 lbs...are you kidding me ? My aux. fuel cell weighs more than that Really, run 40/40, or 40/42 with the trailer.
Brake Pad Posted April 28, 2013 Author #18 Posted April 28, 2013 Mike, run 40/40 when measured cold. If you are hauling the trailer, run 42 on the back tire. Do not raise the tire pressure on the back with just your wife added, as most of us have luggage that weighs more than your wife. 115 lbs...are you kidding me ? My aux. fuel cell weighs more than that Really, run 40/40, or 40/42 with the trailer. all of five foot nothing
GeorgeS Posted April 28, 2013 #19 Posted April 28, 2013 I been running 40lb. for years, so far, over 20K on the E3's My 2 cents worth. I also use " Ride - On " in all my tires, both bikes.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now