Accessory wiring options

[jimmyenglish]

Hi everyone,

 

I need to clean up the endless accessory wiring coming of the battery of my 86'. I have:

 

driving lights

12v accessory plug x2 (one on dash, one in trunk)

amber up front lights (some guy put on)

12v accessory wire for inside trailer accessory plug and int. lights

Ford Exlplorer horn w/relay coming straight from batt.

 

There might be another. Everything is fused but I would like to have a barrier strip or something just to clean it up. It's too willy nilly. All ideas greatly appreciated!

 

Thanks and hope you're all having a great spring!

[Prairiehammer]

Here's my set-up:

 

I've since added another relay to the right side of the airbox for driving lights and have placed the Ignitech TCI on the airbox as well. Here's a link to the thread: http://www.venturerider.org/forum/showthread.php?t=66650

Edited April 16, 2013 by Prairiehammer

[mralex714]

Here's my set-up:

 

I've since added another relay to the right side of the airbox for driving lights and have placed the Ignitech TCI on the airbox as well. Here's a link to the thread: http://www.venturerider.org/forum/showthread.php?t=66650

 

You have shamed me into doing mine, nice work.

Edited April 16, 2013 by mralex714

[jimmyenglish]

Wow! That is awesome. I too, am shamed. Thanks for posting this!

[dacheedah]

When I had my 89 I was having some crazy issues, replacing the fuse bank was suggested, I did not think were electrically related. After upgrading the fuse panel almost all went away. There is a reason we still aren't using them so it is a worthwhile project.

[kevin-vic-b.c.]

I would say that is a man with a long cold non riding season.... my bikes are never off the road long enough to do work like that! Nice work Prairiehammer.

[Snaggletooth]

Here's my set-up:

 

I've since added another relay to the right side of the airbox for driving lights and have placed the Ignitech TCI on the airbox as well. Here's a link to the thread: http://www.venturerider.org/forum/showthread.php?t=66650

 

I've done my fuse block, added needed relays and did my connections better.

 

Now I feel like taking my sidecutters to the whole thing and starting over.

 

Nice work Kevin.

[Power Trippin]

Here's my set-up:

 

I've since added another relay to the right side of the airbox for driving lights and have placed the Ignitech TCI on the airbox as well. Here's a link to the thread: http://www.venturerider.org/forum/showthread.php?t=66650

 

 

Very nice. I need to upgrade mine now, hope it looks half as good!