Ignitech TCI purchase opportunity

[dingy]

I finally sold the last of the Ignitech units last week I got in December and have had several requests for more.

 

This TCI will fit 1st Gen Ventures from 1983-1993. for the 90-93 year bikes adapter cable & program in TCI are different due to single pickup coils. This TCI will also work fine with the 1983 bikes with a minor vacuum location change. Full instructions & pictures included.

 

Price will be $255 for TCI, new MAP sensor, adapter harness, vacuum line, mounting velcro and related small items.

 

Same as last time, optional USB-COM cable is $15. This is not needed in most cases. Only needed if you want to program TCI parameters. It will come from me with very good Venture program installed. This is a little less than I pay for these cables. It is worth it to get one, if I have an update for program it is needed to load new program into TCI.

 

$10 paypal fee.

 

Priority shipping & insurance to buyer is in price for US orders.

Link to last thread on this is at:

 

http://www.venturerider.org/forum/showthread.php?t=74234

 

Main Ignitech thread:

 

http://www.venturerider.org/forum/showthread.php?t=40414

 

PM or call me. Info is in my profile.

 

Gary

Edited July 12, 2013 by dingy
revised

[Venturous Randy]

Gary, this is on my bucket list, but not ready yet.

RandyA

[Yammer Dan]

I still got one that might cut out. Somewhere....

[tz89]

me too

[dingy]

Still looking for interested people.

 

Gary

[Yammer Dan]

THis one taking off kind of slow?? I haven't installed either of mine yet but the peace of mind that I can is great. This thing can cause unbelieveable problems with a 1st Gen. I grabbed a few before they started bringing the big bucks. I probally won't buy this time but who knows???

[dingy]

THis one taking off kind of slow?? I haven't installed either of mine yet but the peace of mind that I can is great. This thing can cause unbelieveable problems with a 1st Gen. I grabbed a few before they started bringing the big bucks. I probally won't buy this time but who knows???

 

They are the same price this time for pre-paid orders as they were the 1st time I did this in August 2011.

 

Gary

[Yammer Dan]

How many 1st Gen sitting out there??? The Warden been watching me.... That valve tool don't work in a womans brain and the TCI's are worse!! Gonna have to start sending them in huge boxes with a lot of packing.

 

"YOU PAID HOW MUCH FOR THIS LITTLE THING!!!"

 

 

"Not as much as I did for that ring you are wearing!!!"

 

 

"WELL I DON'T THINK YOU NEED THAT BIG SCREEN IF YOU ARE GOING TO WASTE ALL THAT MONEY ON THIS JUNK!!"

 

"But But But..."

 

See how it goes around here!!

[norsk1]

I'm thinking about the TCI upgrade. I bought a low milage 1990 (27,000) last fall, put a floorboard kit on it (much fiddling), working on getting a seat modified to my satisfaction and a R6 brake upgrade.

 

My cycle runs good now and I'd like to take a break from putting more time and $$$ into it. Perhaps if you get to where you need just one more person to buy let me know.

 

 

Roy

[Yammer Dan]

I'm thinking about the TCI upgrade. I bought a low milage 1990 (27,000) last fall, put a floorboard kit on it (much fiddling), working on getting a seat modified to my satisfaction and a R6 brake upgrade.

 

My cycle runs good now and I'd like to take a break from putting more time and $$$ into it. Perhaps if you get to where you need just one more person to buy let me know.

 

 

Roy

 

 

Roy I don't think this one will work on your bike.

[dingy]

Roy I don't think this one will work on your bike.

 

Yes it will !!

 

Different adapter harness & different program in TCI and it will work on 90-93 Ventures also.

 

Gary

[Yammer Dan]

Sorry Gary I was thinking 90-93 different. Roy it is good to have for the peace of mind for me. Those things can die at any time. Usually won't crap out all at once but I got it covered in my saddlebag on any trip I take. Gary provides good hookup instructions and everything to do it with on the spot. I even think I could change one out.

[abusive throttle cranker]

I'm interested but $240! Whew! And since my kids are grown theres no piggy banks to raid!

[Yammer Dan]

I'm interested but $240! Whew! And since my kids are grown theres no piggy banks to raid!

 

Try the price on a New one from Yamaha.

[dingy]

I now have enough interest to proceed with another buy of the Ignitech modules.

 

$255, if using paypal added $7.00 to cover paypal fees.

 

Programing cable is $15 extra, not needed unless you want to reprogram module.

 

This will include US priority shipping & insurance.

 

Time frame for you to receive TCI will be about 4 weeks.

 

I have to order TCI's from Czech Republic & map sensors from China.

 

Had to bribe wife to let me take $1500 out of savings to get extra units to make this feasible and profitable for me. Got to buy her a set of running boards for her jeep out of my profits.

 

Gary

Edited April 5, 2013 by dingy
revised

[dingy]

TCI's were ordered Monday, They may ship late next week is what I was told.

 

I already have new MAP sensors, and other small items.

 

I have several extras of these still available.

 

I am working with a guy on the VMax side to use one of Ignitech's Fuel Injection controllers on a VMax. He lives about 15 miles from me and has a Dyno in garage. He's doing work, I am getting FI controller that will do what he is trying to accomplish.

 

Same guy already has one of the units I am selling and has it on a turbo charged Vmax.

Gary

[johnwingman1]

thanks gary. put me down for one and let me know when and what i need to do to paid for it. at this point in time i will try anything to fix my scooter! it is ridding season now!thaks. happy motoring. john

[stolennitrous]

Gary do have any spare ignition modules? I have a 1985 Venture 1200 and I bought the bike with the original taken out due to it being bad and the guy treid to solder it and destroyed it. Please let me know

[dingy]

Gary do have any spare ignition modules? I have a 1985 Venture 1200 and I bought the bike with the original taken out due to it being bad and the guy treid to solder it and destroyed it. Please let me know

 

I will have spares available.

 

Gary

[stolennitrous]

Ok I will take one. Let me know when you receive them and I will give you my PayPal information to bill me. Thank you so much

[johnwingman1]

gary did you post you have ordered more tci replacements on 4-7-13? if yes please tell me what i need to do to purchase one from you thanks john:fingers-crossed-emo

[dingy]

TCI's were ordered & payment sent on 4/1/13. They said 2 weeks delivery time frame. I can't pin down a date when they will ship. They have in past sent me the shipping & tracking info when they ship. Takes 3-4 days to get delivered to me.

 

I have MAP sensors from manufacturer.

 

I will send you a PM on ordering.

 

Gary

[johnwingman1]

thanks so much gary. i will be watching for pm thanks john:cool10:

[johnwingman1]

i cant make pm work. can you send me your phone# so i can call you?

[stolennitrous]

I cannot get PM to work either and I cannot view profiles for numbers. I figured it out though I am not a paid member as of yet. but I want one very badly. do I need a MAP sensor as well or do I just plug in and route the vacuum line like i read in the earlier posts?

 

Not trying to bother you just trying to figure out what all I need to buy so I can ride