1984 Yamaha Venture Clutch Reservoir

[paysaw]

I had no choice but to drill out my clutch reservoir top plate screws.What is the type and number of screw that I can use for a replacement.I have to bleed my front brakes and I am going to have the same problem.Thanks all.:confused24:

[dingy]

I had no choice but to drill out my clutch reservoir top plate screws.What is the type and number of screw that I can use for a replacement.I have to bleed my front brakes and I am going to have the same problem.Thanks all.:confused24:

 

Listing in classifieds

 

http://www.venturerider.org/classifieds/showproduct.php?product=3887

 

I don't remember the size I ordered.

 

Gary

[KIC]

I Drilled several of mine and used and easy out . Then went to Ace Hdwr and got stainless steel ones to match

[KIC]

I Drilled several of mine and used and easy out . Then went to Ace Hdwr and got stainless steel ones to match

[Evan]

Ray, I don't know the specific size of these screws but I replaced mine with ones that I bought from a Yamaha dealer - part no 9807-04012-00. Not that expensive.

[dingy]

I measured one of new screws I have.

 

4mm x 0.7 thread x 12mm overall length, countersunk head.

 

Gary

[dacheedah]

hand impact driver with screw trip will often remove even the most stubborn screws