Harley exhaust Modification

[usedcyclesales]

I've got the exhaust from a Harley Road king is there any where I can find the diagram to make the brackets and /or buy the brackets an clamps for a 2005 Royal Star tour deluxe???

[MidlifeVenture]

If there the same as Venture http://www.venturerider.org/forum/showthread.php?t=34426

[MidlifeVenture]

http://www.ebay.com/itm/YAMAHA-VENTURE-ROYAL-STAR-EXHAUST-MUFFLER-ADAPTER-KIT-/150642393096?pt=Motorcycles_Parts_Accessories&hash=item2312fc8008&vxp=mtr

[MidlifeVenture]

http://www.ebay.com/itm/Royal-Star-Venture-Harley-Davidson-Muffler-VTwin-Clamps-II-/251006468295?pt=Motorcycles_Parts_Accessories&hash=item3a7126c0c7&vxp=mtr

 

One last time

[playboy]

Some have used a P-Clamp attached to the rear saddle bag brace and the last hole or rear hole on the harley muffler.

[Douginflorida]

I've got the exhaust from a Harley Road king is there any where I can find the diagram to make the brackets and /or buy the brackets an clamps for a 2005 Royal Star tour deluxe???

 

I have a set of brackets I bought that are made of aluminum that will work,I bought them and didn't realize they do not fit a 1998 RSTD.I had to fab my own brackets...I have brackets only,you can get any harley exhaust clamp to fit. $20. including shipping sound fair????PM me if interested.I can take a pic and text or email it to you..

I used the same step clamp that Scott2007 sent an eBay link to..Worked perfect.

Edited February 16, 2013 by Douginflorida
added info

[djh3]

I went cheap. Not totaly convinced I'm going to leave them on. So I am currently using a stainless steel hose clamp from local hardware store (HD or Lowes) and 1" P or adel clamp. I think its a 1/4" bolt that goes into the mount tab. I shortened one up because they aere all to long, needs to be just under a half inch I think. P clamp goes around the saddlebag brackets and bolts right up to mufflers. I have actually polished the clamps so much they look like chrome. I also used a piece of rubber to sort of space up the difference between the P clamp and the bar. Seems 3/4" is to small and the 1 inch is a tad to big. A couple wraps of electrical tape would do it too. But I had the hose, actually its only like half around the bar.

[djh3]

OK Usedcycles asked for some info, so I sent him what I had and a couple pics of the "el-chepo" mod.

Edited February 26, 2013 by djh3