pietermoore Posted February 9, 2013 #1 Posted February 9, 2013 Ever heard the old saying, "the more you dig, the deeper the hole gets"? I just wanted to do the regular winter go over to get my 92 Venture ready for spring. You know, change plugs, grips, rear tire... the fun stuff. Then I decided to replace the valve cover gaskets. Of coarse then you have to check the valves while you're in there, right? Now I need shims and something to compress the buckets. Anyone have a kit to loan? I would of coarse add some more new shims to the pot and return the kit promptly.
Black wing Posted February 9, 2013 #2 Posted February 9, 2013 haha i know how that goes, wanted to do a carb job and re line the gas tank. now the bike is stripped and getting a total work over
Miles Posted February 9, 2013 #3 Posted February 9, 2013 Anyone have a kit to loan? I would of coarse add some more new shims to the pot and return the kit promptly. Check in with Earl...at Skydoc_17... here on the forum. He is the resident owner and loaner of the valve shim kit and tools.
pietermoore Posted February 9, 2013 Author #4 Posted February 9, 2013 Thanks Miles, I'll check w/ Skydoc
Freebird Posted February 9, 2013 #5 Posted February 9, 2013 I've got a tool but unfortunately, no shim kit. I would be glad to loan out the tool though.
Condor Posted February 9, 2013 #6 Posted February 9, 2013 haha i know how that goes, wanted to do a carb job and re line the gas tank. now the bike is stripped and getting a total work over I thought I was the only one with that problem... Change light bulb...rewire house!!
abusive throttle cranker Posted February 22, 2013 #7 Posted February 22, 2013 I also need the use of a shim kit. Perhaps Freebird will loan his tool out and each person adds shims as he swaps his in and out? We'll start another kit in circulation.
Freebird Posted February 22, 2013 #8 Posted February 22, 2013 Just let me know if you need the tool. I have no problem sending it out.
abusive throttle cranker Posted February 22, 2013 #9 Posted February 22, 2013 Ok cool.......oh wow u have a 2nd generation! Does that tool fit the 1st generation too? Oberlin is in Ohio correct? I'm in north central Arizona. Is anyone between us interested? I have a list of things yet to be done on my bike so there is time 4 intermediate people- no real rush for me. A friend is supposed to lend me a 32mm socket but till he comes thru I'm not sure where its at. But with over 32k miles there must be at least a couple out of spec.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now