Marcarl Posted January 29, 2013 #1 Posted January 29, 2013 I need a valve adjustment tool, anyone close have one to lend out?
slowrollwv Posted January 29, 2013 #2 Posted January 29, 2013 I have one, send me your addy and I will put it in the mail to you. Then you can send it back when you are done.
Wizard765 Posted January 29, 2013 #3 Posted January 29, 2013 Carl: Mother has a kit with the tool and some disks.. Maybe see if he has it or someone else has it.
ragtop69gs Posted January 30, 2013 #4 Posted January 30, 2013 I have one you can Use,stop by ab nd pick it up anytime . If ya don't want to pay the toll I can toss it across the river to ya.
BradT Posted January 30, 2013 #5 Posted January 30, 2013 If ya don't want to pay the toll I can toss it across the river to ya. Carl remember your passport or at least leave Ben at home. Brad
Marcarl Posted January 30, 2013 Author #7 Posted January 30, 2013 Thanks for all your offers and replies,, and yes, some replies were surely of the VR kind,,, not they they were kind, it was just that type,, not that there was a whole lot of typing, but I know you was all just saying, and seeing as we're on here saying,,,, well thanks. I don't plan to cross the river, and I doubt if you could throw it that far anyways, I probably have to swim out a ways to find it and I don't swim very well, especially in the winter. The mail is too slow and half the cost of me buying one would be used up in postage, so that would be against a Dutchman's rules, so much for that thought, but all is appreciated anyways. I'll see if somebody from the local dealer will lend me theirs, otherwise we'll have one available right local in my shop. Wizard, I know Mother has one, but there again it's cheaper to buy one and then I have one for the next time. Hope this was not too long a read,,, I had to stop early, running out of ink!
Bones158 Posted February 3, 2013 #8 Posted February 3, 2013 Can I borrow someones valve shim kit. I will pay postage each way. Thanks
wrenchrob Posted February 3, 2013 #9 Posted February 3, 2013 I have one you can borrow carl. I dont have any shims though.
bongobobny Posted February 3, 2013 #10 Posted February 3, 2013 Well, if you end up forcing your wallet open and actually buy one, then I can borrow it some time...
Marcarl Posted February 3, 2013 Author #11 Posted February 3, 2013 I have one you can borrow carl. I dont have any shims though. Thanks Rob, Brantford MC was pleasant enough to lend me theirs, but they got a little unpleasant when I came back the second day to borrow another one and they said they had lent it out already and I said I could sell them one. Well anyways, they have theirs back, I got my shims exchanged and all is good now, only cost me a few peperettes. Now Flyingfool, is sending me one to test out, so I should have my own soon. Thanks again. Carl
Marcarl Posted February 3, 2013 Author #12 Posted February 3, 2013 Well, if you end up forcing your wallet open and actually buy one, then I can borrow it some time... OOOoooooooo that'll cost ya!!!:happy65:
Flyinfool Posted February 3, 2013 #13 Posted February 3, 2013 Bob missed his chance while he was here last fall. I got a bunch of them tools in the basement Bob was sitting within about 6 feet of them. I have a couple out for testing, as soon as I hear back that they worked OK I will sell all of my extra ones. Carl If you already did your valves then how are you going to test the tool that I sent you? I am finally working on building my surface grinder so that I can make custom shim sizes if needed.
Marcarl Posted February 3, 2013 Author #14 Posted February 3, 2013 Bob missed his chance while he was here last fall. I got a bunch of them tools in the basement Bob was sitting within about 6 feet of them. I have a couple out for testing, as soon as I hear back that they worked OK I will sell all of my extra ones. Carl If you already did your valves then how are you going to test the tool that I sent you? I am finally working on building my surface grinder so that I can make custom shim sizes if needed. A feller can always find more valves, and this engine isn't back together just yet,, make take a while, always finding more things to play with.
chabicheka Posted February 3, 2013 #16 Posted February 3, 2013 Or maybe, he will want use it to do the valves on my Venture??? Then if all is good, i can pay Flyingfool for the tool, and Carl can keep the tool. I can bring a bunch of Toronto Pepperetes too. Okay... i will throw in some Pizza and Beers too.
Marcarl Posted February 3, 2013 Author #17 Posted February 3, 2013 Simple, Jeff, he'll lend it to me!!! Okay... i will throw in some Pizza and Beers too. Now you're talkin''' 'bout time. Maybe let Bob know how this works. Tool+beer+meat,,,, YA! a Meat & Breet!!!:happy65:or maybe a MD:happy65::happy65:
Flyinfool Posted February 3, 2013 #18 Posted February 3, 2013 PIZZA!!!! I am a pizza kinasewer. Some how It sounds like I am missing out.
Marcarl Posted February 3, 2013 Author #19 Posted February 3, 2013 PIZZA!!!! I am a pizza kinasewer. Some how It sounds like I am missing out. Ya and maybe at your expense,, now go figure.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now