Santa Hal Posted January 7, 2013 Share #26 Posted January 7, 2013 Please take plenty of pictures on the way and of the trailer too. It sounds like fun. When are you going? Hal Link to comment Share on other sites More sharing options...
eusa1 Posted January 7, 2013 Share #27 Posted January 7, 2013 Please take plenty of pictures on the way and of the trailer too. It sounds like fun. When are you going? Hal We did that with the missing stuffed animal:whistling: Link to comment Share on other sites More sharing options...
gunboat Posted January 7, 2013 Author Share #28 Posted January 7, 2013 (edited) We did that with the missing stuffed animal:whistling: hay that's an idea! why don't we have annie's mascot round up with the trailer. hitch a ride and end up at portland,oragan together. i better open up a jar of honey for a hungry bear. update: i feel ya'll will like some of the stuff brad & i came up with, for annie's & alan trailer. best regards don c. Edited January 8, 2013 by gunboat Link to comment Share on other sites More sharing options...
eusa1 Posted January 7, 2013 Share #29 Posted January 7, 2013 Gotta find it first! Link to comment Share on other sites More sharing options...
Aussie Annie Posted January 7, 2013 Share #30 Posted January 7, 2013 Don and I have something very special for the back of the trailer, you WILL like it TICKETY BOO!!! & OKIE DOKIE Link to comment Share on other sites More sharing options...
Aussie Annie Posted January 7, 2013 Share #31 Posted January 7, 2013 Thanks for the PM heppster This is what the trailer looks like before anything gets put on it....... Link to comment Share on other sites More sharing options...
Marcarl Posted January 7, 2013 Share #32 Posted January 7, 2013 I'd say it's missing something,,,, maybe SNOW???? Send it up here, we have little we could put in it. Link to comment Share on other sites More sharing options...
Trader Posted January 7, 2013 Share #33 Posted January 7, 2013 2 thoughts 1) By the time you all add a "little something" to the trailer it will be too heavy to tow! 2) Just contact Miles....he could deliver it and be back the same weekend! Ok....back to my corner now. (where is Dan anyway?) Link to comment Share on other sites More sharing options...
Rick Haywood Posted January 7, 2013 Share #34 Posted January 7, 2013 Gotta find it first! The mascot from 2010 was auctioned off at vogel and the proceeds went to St Jude if I remember correctly Link to comment Share on other sites More sharing options...
eusa1 Posted January 7, 2013 Share #35 Posted January 7, 2013 The mascot from 2010 was auctioned off at vogel and the proceeds went to St Jude if I remember correctly thanks rick, my daughter got involved in taking pictures of the bear while we had it and asked where it went after we had it and nobody would ever respond to my questions about it. she has asked several times over the past years and i told her that he must have gone into the wittness relocation program:confused24: Link to comment Share on other sites More sharing options...
friesman Posted January 7, 2013 Share #36 Posted January 7, 2013 thanks rick, my daughter got involved in taking pictures of the bear while we had it and asked where it went after we had it and nobody would ever respond to my questions about it. she has asked several times over the past years and i told her that he must have gone into the wittness relocation program:confused24: That may have been the "witless protection program" . :rotfl: Link to comment Share on other sites More sharing options...
gunboat Posted January 8, 2013 Author Share #37 Posted January 8, 2013 ok thanks for the update of annie's bear. i've got it covered. i got two bears for the trailer. one for annie & 1 for alan. TEXAS BEARS. best regards don c. Link to comment Share on other sites More sharing options...
Aussie Annie Posted January 8, 2013 Share #38 Posted January 8, 2013 The mascot from 2010 was auctioned off at vogel and the proceeds went to St Jude if I remember correctly Rick is correct........ I think Peggy [Mrs Sling] has it Link to comment Share on other sites More sharing options...
Aussie Annie Posted January 8, 2013 Share #39 Posted January 8, 2013 ok thanks for the update of annie's bear. i've got it covered. i got two bears for the trailer. one for annie & 1 for alan. TEXAS BEARS. best regards don c. GOOD LORDY!! what's a Texas bear :confused24::confused24: Link to comment Share on other sites More sharing options...
gunboat Posted January 8, 2013 Author Share #40 Posted January 8, 2013 annie you will just have to wait till you open the cover on the trailer. best regards don c. Link to comment Share on other sites More sharing options...
Aussie Annie Posted January 9, 2013 Share #41 Posted January 9, 2013 annie you will just have to wait till you open the cover on the trailer. best regards don c. Okie Dokie..... that job is now Alan's :rasberry: Link to comment Share on other sites More sharing options...
IH Truck Guy Posted January 12, 2013 Share #42 Posted January 12, 2013 That helped out TREMENDOUSLY last year when I had my problems, will do anything at all to help out with it this year..... Is IH Truck Guy in any of these areas??!! (Way to go last year Dan, you helped out a BUNCH of folks here!) I would be glad to help again..... Right now I'm broke down in Rapid City on my way to San Francisco....... Funny thing being this close to Sturgis and haven't seen a bike yet...... -3 and 30 mph winds,with 8" of snow....... Link to comment Share on other sites More sharing options...
Aussie Annie Posted January 14, 2013 Share #43 Posted January 14, 2013 Hope you're not stuck too long Dan. Thanks for offering to help again Looks like Paradise H-D in Tigard [Portland] will have room up on their messanine above work shop to store for short time Link to comment Share on other sites More sharing options...
gunboat Posted January 21, 2013 Author Share #44 Posted January 21, 2013 hi folks hope all is well in everyones neck of the woods. just to let everyone in on one of the plan's for annie's and alen's trailer. brad and i will be doing some stuff to the trailer. before it starts it's trip north west. i want to envolve all the venture riders from everywhere in this project. on the front of the trailer is a "wall and is the perfect spot" to mount state or a country emblem's. i will start with a TEXAS emblem. they should not be any bigger than 3"x3". they can be sent to me or installed on the trailer when annie & alan come thru your state. bongbobob suggested putting on a PGR emblem on the trailer, i like that and it will be added. also it will have a couple of venturerider.org stickers/emblems installed. don't worry annie, ther's plenty of room for the "aussie down under touch". best regards don c. Link to comment Share on other sites More sharing options...
pmelah Posted January 21, 2013 Share #45 Posted January 21, 2013 annie you will just have to wait till you open the cover on the trailer. best regards don c. hi folks hope all is well in everyones neck of the woods. just to let everyone in on one of the plan's for annie's and alen's trailer. brad and i will be doing some stuff to the trailer. before it starts it's trip north west. i want to envolve all the venture riders from everywhere in this project. on the front of the trailer is a "wall and is the perfect spot" to mount state or a country emblem's. i will start with a TEXAS emblem. they should not be any bigger than 3"x3". they can be sent to me or installed on the trailer when annie & alan come thru your state. bongbobob suggested putting on a PGR emblem on the trailer, i like that and it will be added. also it will have a couple of venturerider.org stickers/emblems installed. don't worry annie, ther's plenty of room for the "aussie down under touch". best regards don c. uhhhh i dont think:no-no-no: that trailer gonna be big enough to hold 1 TX Bear let alone 2 Link to comment Share on other sites More sharing options...
Aussie Annie Posted January 21, 2013 Share #46 Posted January 21, 2013 hi folks hope all is well in everyones neck of the woods. just to let everyone in on one of the plan's for annie's and alen's trailer. brad and i will be doing some stuff to the trailer. before it starts it's trip north west. i want to envolve all the venture riders from everywhere in this project. on the front of the trailer is a "wall and is the perfect spot" to mount state or a country emblem's. i will start with a TEXAS emblem. they should not be any bigger than 3"x3". they can be sent to me or installed on the trailer when annie & alan come thru your state. bongbobob suggested putting on a PGR emblem on the trailer, i like that and it will be added. also it will have a couple of venturerider.org stickers/emblems installed. don't worry annie, ther's plenty of room for the "aussie down under touch". best regards don c. Love the idea.... proud to be a PGR Link to comment Share on other sites More sharing options...
gunboat Posted February 24, 2013 Author Share #47 Posted February 24, 2013 hi annie & alan annie got a question for ya. which bike are you going to tow the trailer with? should be painting the trailer soon. have started getting stuff to TEXASIZE it. i need to start working on getting the trailer up towards utahdave's after the paint job. hopefully will be able to show it off at doodles's mx day. man i would really like to take it allthe way to portland. but i'am pretty sure i can't swing that. that would be one sweet ride. regards don c. Link to comment Share on other sites More sharing options...
Aussie Annie Posted February 24, 2013 Share #48 Posted February 24, 2013 Hi gunboat.......... Alan usually tows the trailer, so that will be a red 1st Gen Appreciate all you can do :bighug: Link to comment Share on other sites More sharing options...
Aussie Annie Posted April 1, 2013 Share #49 Posted April 1, 2013 how's the TEXASIZING going??? Can anyone help to get the trailer from Utah to Portland?? Link to comment Share on other sites More sharing options...
Aussie Annie Posted April 2, 2013 Share #50 Posted April 2, 2013 Helloooo....................... you there Gunboat?? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now