Can't identify floorboards

[mbrood]

I was sold these as going on a MKII 1st Gen bike and since I have a MKI as well I can verify it goes to neither... any help out there with finding their proper use?

 

http://www.bergall.org/temp/venture/floorboards/mc1.jpg

http://www.bergall.org/temp/venture/floorboards/mc1a.jpg

http://www.bergall.org/temp/venture/floorboards/mc2.jpg

[Squidley]

Do they have any #'s on them at all Mike?

[Pegasus1300]

they look like 1200 Goldwing boards by Markland.Can't be sure I haven't looked at one in a long time but tha's what it looks like.

[paysaw]

Hi. I had a pair of these floor boards on my 84 Venture Royal.They fit fine. I swapped them with a member here Yamamike who put them on his 83.

[Brake Pad]

I hope this picture will help, this is my old 1984 aspencade

[Eck]

The same floorboard (without the hardware that you have) is shown attached to a 1997 Honda VT1100C2 ACE.

[mbrood]

Brad, there are no numbers on the boards or the mount flanges. I sized them against my 84 and 86 and they fit neither and Markland said that they can't index anything that is out of production. These are in cherry shape but for a Venture utterly worthless.

[Squidley]

Brad, there are no numbers on the boards or the mount flanges. I sized them against my 84 and 86 and they fit neither and Markland said that they can't index anything that is out of production. These are in cherry shape but for a Venture utterly worthless.

 

 

Bummer, perhaps someone with some good fabricating skills could modify them into a set of highway boards for stretching their legs out