bluerstd08 Posted September 19, 2012 #1 Posted September 19, 2012 This was on our way back from MS to NC with a short detour via US 129. I have had zero problems cornering on all 3 CTs that I have run. [ATTACH]71705[/ATTACH]
Guest Swifty Posted September 22, 2012 #2 Posted September 22, 2012 This was on our way back from MS to NC with a short detour via US 129. I have had zero problems cornering on all 3 CTs that I have run. I wonder if you'd have any problems if those CTs were on a bike that could lean in corners.
BuddyRich Posted September 22, 2012 #3 Posted September 22, 2012 You know, I never had a problem with the CT's in short or sharp turns. But just watch yourself if you get in one of those long high speed turns. That's where my CT told me it belonged on a car. And the bike became unpredictable under certain conditions where before I put the CT on it I knew what it was going to do. I'm not saying don't use one if that's what you want to do . You couldn't pay me enough to use one again.
bluerstd08 Posted September 23, 2012 Author #4 Posted September 23, 2012 I definitely dont push the limits of the CT. I know they are not made for high speed cornering. Ive felt that instability as well. If i wanna corner hard ill go back to a standard MT. Thanks
OB-1 Posted September 25, 2012 #5 Posted September 25, 2012 You know, I never had a problem with the CT's in short or sharp turns. But just watch yourself if you get in one of those long high speed turns. That's where my CT told me it belonged on a car. And the bike became unpredictable under certain conditions where before I put the CT on it I knew what it was going to do. I'm not saying don't use one if that's what you want to do . You couldn't pay me enough to use one again. This was basically my experience with a CT. CT's really work well in low speed corners and you can easily scrape the floor boards with confidence, but that sure footed-ness fades as the speed increases. My CT also had a terrible dislike for roto-mill surfaces, (during repaving). I'll stick with MC tires on the RSV.
alwrmcusn Posted November 11, 2012 #6 Posted November 11, 2012 After a PGR mission yesterday at Jamestown, TN I followed a Honda 1800 VTX with a CT for about 20-25 miles along some curvy roads. He seemed to be tracking and doing very well, but the tire just appeared (to me) to be "mushy" during corners. It was like the tire was not at normal pressure. On the straights it did not appear to be low at all. I need to own up to being a darksider myself, but then I ride a trike
SilvrT Posted November 11, 2012 #7 Posted November 11, 2012 I've said this before but ... it would seem that CTs work well on some bikes and not on others. On my Wing, the CT out performs an MT in all conditions with one minor exception and that is riding along those parallel "high/low" ridges. On those you can feel it wanting to "wiggle". This is very minimal and has no adverse effect on handling. I have no hesitation pushing the scoot in high-speed twisties. You'll find that most darkside Wing riders will have similar comments. The RSV on the other hand has a totally different frame geometry as well as a totally different centre of gravity / weight distribution. This quite well could be why under some conditions (such as high-speed corners) that the CT on the RSV might leave a person feeling uncomfortable and loose confidence in the CT. (just my Canuck loonie's worth)
Hueydriver Posted December 23, 2012 #8 Posted December 23, 2012 I have added a Voyager trike kit to my Venture and now I'm looking for a passenger car tire than will fit. The OEM tire is 150/90-15. The closest CT that I have found that may fit is 165/80-15 that was stock on a 69 VW. Does anyone out there have any first hand knowledge on which tire I should try? Thanks
Holly Posted December 23, 2012 #9 Posted December 23, 2012 I have added a Voyager trike kit to my Venture and now I'm looking for a passenger car tire than will fit. The OEM tire is 150/90-15. The closest CT that I have found that may fit is 165/80-15 that was stock on a 69 VW. Does anyone out there have any first hand knowledge on which tire I should try? Thanks Yep that is the size, but imho, i would not buy the cheapest tire, would go for at least the mid range.
Wade 2000 Posted December 23, 2012 #10 Posted December 23, 2012 Looks like you get over pretty good! But I think I'll stay with the oval sticky
Rider838 Posted August 11, 2013 #11 Posted August 11, 2013 I am a bike shop owner and have had 3 different bikes with ct's really enjoyed the ride. just purchased my first new bike (RSV). so with warranty issues I am not going to change yet. But I have a number of customers that have gone over to the dark side and are very happy with the ride and the ware mileage increase. With all that being said normal conventional driving is the safest beyond that only the emts know for sure. Rider838 2012 RSV 1996 1200 custom
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now