tbbrider Posted July 5, 2012 Share #1 Posted July 5, 2012 Does anyone have a picture of a stock muffler that has been cut open.I am confused about where to cut them. I have a set someone gave me,I don't want to mess my quite pipes up. Link to comment Share on other sites More sharing options...
MikeWa Posted July 5, 2012 Share #2 Posted July 5, 2012 http://www.venturerider.org/forum/showthread.php?t=41418&highlight=muffler Hope this helps Mike Link to comment Share on other sites More sharing options...
creole Posted July 6, 2012 Share #3 Posted July 6, 2012 (edited) I didn't do it to mine but the po did. I think he got it right, nice rumble and still can hear the radio on the highway. Tried to attach a pic from iPhone can't get it ..... I'll keep trying.... Edited July 6, 2012 by creole add picture Link to comment Share on other sites More sharing options...
Dave3 Posted July 6, 2012 Share #4 Posted July 6, 2012 I did my pipes. Basically, there is a cone shaped piece of sheet metal around the pipe between the baffle and outer chrome. drill a couple holes in a line from the end of the pipe to the center at the exhaust hole. then be careful to pull the cone metal away from the chrome and remove it completely. Then you can drill several holes spaced neatly around the baffle. The exhaust will rumble louder with more or bigger holes. Good luck and take it slow. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now