Flasher Relay 41R-83350-71-00

[Ozlander]

My turn signals have become cold blooded. They only work when it's above about 72* (not a problem right now)

I'm assuming it's a sealed unit and no fixing possible.

I believe the part no. is 41R-83350-71-00.

 

Does anybody have a spare?

[KIC]

There are all sorts of unit looking things on my two 84 parts bikes. If I knew 1) if an 84 would work, 2) where it is located and 3) what it looks like I would be happy to send you one.

[dingy]

There are all sorts of unit looking things on my two 84 parts bikes. If I knew 1) if an 84 would work, 2) where it is located and 3) what it looks like I would be happy to send you one.

 

In the headlight housing area. About 2" x 4" x 3/4"

Should have 41R printed on it.

10 wire connector, 9 wires used.

Gary

[dingy]

Pictures of 41R relay.

 

Gary

[KIC]

So an 84 relay would work on an 89 ?

[dingy]

Yupper.

 

Gary

[KIC]

I will try to get over to the bikes tomorrow to look. I have to finish a 3 1/2 hour online certification for a DSS Certification.

 

When I finish that I can ride the heat wave over to the bikes.

[Ozlander]

I will try to get over to the bikes tomorrow to look. I have to finish a 3 1/2 hour online certification for a DSS Certification.

 

When I finish that I can ride the heat wave over to the bikes.

 

I'm not in a real big hurry, like I say, it works when it's hot.

Went out and looked for mine. Had to cut a nylon tie to lower the main harness that goes across the top of the head light opening to see it. It's in the top of the fairing about a half inch to the left of center as you're looking at the bike. It in a rubber holder and will pull out.