DragonRider Posted June 24, 2012 Posted June 24, 2012 Does anyone have a spare computer board for the dash display for an 83, I think mine is bad and I am not to good with a soldering gun..........would like to just replace it and be done with it.........I know mine has been resoldered at least 2 times by the Muffin in the past, but he aint around...........
bongobobny Posted June 24, 2012 Posted June 24, 2012 I did at one time, but I'm not sure what happened to it. I will look after Church...
KIC Posted June 24, 2012 Posted June 24, 2012 If BongoBobny doesn't have one, I can look at my one parts bike and see what is left on it's dash. I presume it is in the dash under the gauges ?
DragonRider Posted June 24, 2012 Author Posted June 24, 2012 It is accessed after removing the windshield and dash cover.........thanks. Here is the link telling you how to remove it. http://www.venturerider.org/forum/showthread.php?t=33328
Yammer Dan Posted June 24, 2012 Posted June 24, 2012 I'm looking Lew but don't think I have a extra. Might have got one when I was stocking up on parts.
bongobobny Posted June 24, 2012 Posted June 24, 2012 Can't find it so I must have already gave it away, sorry...
DragonRider Posted June 24, 2012 Author Posted June 24, 2012 Thanks for checking Bob............ This group is great, need a part, just post it, likely to find what you need, I just found a kickstand interlock switch that someone needs........... Lewis Can't find it so I must have already gave it away, sorry...
easternrider Posted June 24, 2012 Posted June 24, 2012 Does anyone have a spare computer board for the dash display for an 83, I think mine is bad and I am not to good with a soldering gun..........would like to just replace it and be done with it.........I know mine has been resoldered at least 2 times by the Muffin in the past, but he aint around........... check out this guy, he may have one. He has a parts bike http://novascotia.kijiji.ca/c-cars-v...AdIdZ374867023
DragonRider Posted June 24, 2012 Author Posted June 24, 2012 Wish it wasnt so far away, I would buy them from him............:bang head: check out this guy, he may have one. He has a parts bike http://novascotia.kijiji.ca/c-cars-v...AdIdZ374867023
mm482 Posted June 25, 2012 Posted June 25, 2012 I think I have one from a 86. If it will work on the 83 you can have it. Earl
DragonRider Posted June 25, 2012 Author Posted June 25, 2012 (edited) Thanks Earl............Compatibility chart says it will work. Thanks, Earl, How much I will send you paypal plus shipping. I think I have one from a 86. If it will work on the 83 you can have it. Earl Edited June 25, 2012 by DragonRider
a1bummer Posted June 25, 2012 Posted June 25, 2012 86 is different than and 83. If I remember right, the 83 is different than all the rest, and then 84-85 different still than 86-93 due to cruise control I believe. But then I'm betting there are some exceptions due to how the bike is equipt. If I'm wrong, please let me know. I know I have one here somewhere, I'll look after work this evening and get back to ya. Its in the basement somewhere. I gave the rest of it away already. I have and 84 and it won't work on it. Bill
bongobobny Posted June 25, 2012 Posted June 25, 2012 Yup! '83 will only work on '83. Different shape and size on the '84 up...
Marcarl Posted June 25, 2012 Posted June 25, 2012 How can one tell if it's from an 83,, I have one here but not sure of the year.
KIC Posted June 25, 2012 Posted June 25, 2012 I will try to get over to where my parts bikes are. My purple one has part of the dash still on it. I believe it is an 83. Is there a way to tell the exact year from the VIN ?
Keemez Posted June 25, 2012 Posted June 25, 2012 Is there a way to tell the exact year from the VIN ? Yep: http://en.wikipedia.org/wiki/Vehicle_Identification_Number#Model_year_encoding
Marcarl Posted June 25, 2012 Posted June 25, 2012 I have one that has 30120 on it, I think it's an 83?
DragonRider Posted June 25, 2012 Author Posted June 25, 2012 Why couldnt these be simple......................Yammer this is the part # from one of the sites I checked 26H-W8351-M000. :bang head:
mm482 Posted June 25, 2012 Posted June 25, 2012 The part # on the one off the 86 is 41R-M15Y9. It has two elt. connectors, one has 9 flat blade connectors (5 on the top row and 4 on the bottom row). The other connector has 14 small round pins (7 on top row and 7 on bottom row) Earl
bongobobny Posted June 25, 2012 Posted June 25, 2012 How can one tell if it's from an 83,, I have one here but not sure of the year.Different shape, more squareish rather than rectangular, and different connectors...
bkuhr Posted June 25, 2012 Posted June 25, 2012 (edited) If it helps, here is a pic of my 83' dash pins count like: ---- O ---- ---- - ---- Edited June 25, 2012 by bkuhr more
friesman Posted June 25, 2012 Posted June 25, 2012 I have most of the dash for an 85 and a cmu if that will help, but I think the wiring is different.
a1bummer Posted June 26, 2012 Posted June 26, 2012 Well I looked through all my goodies until I remembered I gave it to a co-worker a couple years back for his 83. Sorry if I got your hopes up. Bill
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now