Diamond R Hitch Receiver ?

[FuzzyRSTD]

Could some one please give me the measurements for a Diamond R Receiver ? I need some measurements from you kind folks pleaseeeeee. ? Thank you in advance.....

 

[ATTACH]67619[/ATTACH]

 

 

[ATTACH]67618[/ATTACH]

 

A. Measurement from front to rear, measuring on the top side.

 

B. Thickness of the receiver bar.

 

C. Measurement from top to bottom of the receiver on the front side, not including the thickness.

 

D. Measurement from top to the center of the pin hole.

 

E. Pin hole size ?

 

F. How wide is the receiver from one side to the other ?

 

James

[miller47]

I get my bike back from shop tomorrow if no one chimes in I'll get them for you

[miller47]

"a" is 5-1/8

"b" 1s 1/2

"c" is 5-1/8

"d" has 2 holes "1" is 1-3/8 and "2" is 2-7/8 from top

"e" is 5/8

"f" is 2

[FuzzyRSTD]

"a" is 5-1/8

"b" 1s 1/2

"c" is 5-1/8

"d" has 2 holes "1" is 1-3/8 and "2" is 2-7/8 from top

"e" is 5/8

"f" is 2

 

Thank you very much Sir. I really appreciate you taking the time and doing this for me. I will pay it forward to someone else.

 

Thanks again,

 

James (Fuzzy) :thumbsup2: