Jump to content

Recommended Posts

Posted

My Venture pretty much lives in the rain for several months at a time so the clutch lever starts squeaking on a regular basis, every two to three of weeks or so. A little engine oil seems to fix it for a while. I think the lever pivot bushing on mine is somewhat worn and should be replaced since it will drop out of cruise control when we hit a bump. Also some times it is necessary to hold the lever out to get the cruise engaged.

Posted

Remove the clutch lever. All you need is a ten mm wrench and regular screw driver. You will find a small brass fitting that will remove from the lever. Clean and lube and reasemble.. at times that brass bushing will need replaced. It will get worn and distorted at times. Its a ten minute job at best

Posted

Probably wouldnt be a bad spot for a touch of the moly lube you guys put on the splines on rearend. It shouldnt leave the area as fast as say WD 40 or silicone or reg grease. Maybe some copper slip or anti-sieze?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...